3 Packs Chassis Rust Converter Spray 100ML Fast Drying Rust Inhibitor Remover for Car Maintenance Automotive Underbody Protection Anti Corrosion Water Based Primer Brush Included

Chassis Rust Converter Spray 100ML Fast Drying Rust Inhibitor Remover for Car Maintenance Automotive Underbody Protection Anti Corrosion Water Based Primer Brush Included
Chassis Rust Converter Rust Inhibitor Rust Remover Derusting Spray Car Maintenance Cleaning 100ML
Product Description:
Having a rust problem with your car chassis?
Don’t worry! Our Chassis Rust Converter will help you solve the problem easily.
It is the easiest-to-apply, fastest drying rust converter. It takes existing rust and transforms it into an inert coating, sealing out humidity and avoiding future rust and.
No more scraping, sandblasting or grinding!
This conditioner creates a dark, protective polymeric barrier that’s weather-proof for a fresh coat of paint for your car chassis. This Chassis Rust Converter will provide more than two the rust protection.
MAIN FEATURES:
[Convert Existing Rust]
It transforms the existing rust into a dark and protective polymeric barrier, which is weather-proof for a fresh coat of paint for your car chassis. And will provide more than two the rust protection.
[Protect Iron and Metal Surfaces]
It revives and protects iron and metal surfaces automobiles, dumpsters, equipment, railings, etc.
[Prevent Future]
This rust prevents future by locking out humidity from rain and snow. And dries in 20 minutes.
It is low VOC, .
[Surface Preparation]
dislodge large rust and scale particles with a brush or sandpaper. Clean the thoroughly to dislodge dirt, and grease.
[Easy to Use]
Stir well before using. Apply two using either a brush, roller or pump sprayer allowing at
least 20 minutes drying between. Allow 48 hours of cure
before applying a quality paint.
Warm Tips:
Do not apply this product if the temperatures are below 50°F.
Store it in a cool, dry place, protected from freezing or temperatures above 100°F.
For long-lasting protection of iron surfaces, the cured rust converter coating should be sealed with two of oil-based paint. Application equipment should be cleaned immediately with soap and water.
SPECIFICATIONS
Material: Water-based Primmer
Capacity: 100 ml