Description
This ultrasonic liquid flowmeter is made of high-quality ABS and steel through the injection molding process, which is sturdy and durable. Its measurement accuracy is ±1%, which can accurately measure the flow rate and flow velocity of pipeline liquids. The product adopts non-contact ultrasonic measurement, with a large measuring range, which is not affected by system pressure and harsh environment. It is a good assistant for those who need pipeline liquid measurement!
Application
It is widely used in water supply, heating, water conservancy, chemical, pharmaceutical, energy, and other industries. It is suitable for copper and PVC pipes and can detect the flow of liquids such as seawater, alcohol, river water, industrial wastewater, lubricating oil, diesel fuel, and fuel oil.
Specifications
Material: ABS, Steel
Process: Injection Molding
Style: Modern
Color: Blue
Shape: Rectangular
Assembly Required: Yes
Display Type: LCD
Battery Type: Built-in Coin Cell Battery
Mounting Type: Wall and Rail Mounting
Display Content: Current Flow/Heat, Accumulated Flow/Heat ( Need to be Equipped with the Corresponding Sensor )
Rate Units: Meters, Feet, Cubic Meters, Liters, Cubic Feet, U.S. Gallons, Imperial Gallons, Oil Drums, U.S. Oil Drums, Imperial Oil Drums, U.S. Mega Gallons. ( User Configurable )
Applicable Liquid Type: Single Liquid can Transmit Ultrasonic Waves, such as Water, Seawater, Sewage, Oil, Alcohol, etc.
Applicable Tube Materials: Steel, Stainless Steel, Cast Iron, Copper, PVC, Aluminum, Glass Reinforced Plastic, etc. (Lining is Allowed)
Signal Output: 1 x 4-20ma Output, 1 x Oct Pulse Output, 1 x Relay Output
Signal Inputs: 2 x 4-20ma Inputs for Heat Measurement by Connecting Pt100 Platinum Resistors
Interface: Rs485 with Modbus Support
Data Storage: SD Card for Periodic Storage of Preset Results (Without SD Card)
Main Host Protection Grade: IP67
Sensor Protection Grade: IP65(Potting up to IP68)
Host Working Temperature: -20~60°C/-4~140℉
Sensor Working Temperature: -30~90°C/-22~194℉
Humidity: ≤85%Rh
Accuracy: ±1 %
Repeatability: 0.20%
Flow Rate Range: 0~±10m/s
Applicable Tube Diameter: TS-2 Ultrasonic Sensor 20-100mm/0.78-3.94in, TM-1 Ultrasonic Sensor 50-700mm/1.97-27.56in
AC Wide Voltage: AC85~264V
DC Wide Voltage: DC8~36V
Flow Signal Cable Length: 10m/32.81ft
Each Ultrasonic Transducer Width: 8.5cm/3.35in
Host Length: 15.6cm/6.14in(Back), 13.2cm/5.2in(Front), 15cm/5.91in(Left), 9.4cm/3.7in(Right)
Package Included
1* Tuf-2000B Host
2* Steel Belts
1* TS-2 Ultrasonic Transducer(0.78-3.94in)
1* TM-1 Ultrasonic Transducer(1.97-27.56in)
1* 32.81ft Flow Signal Cable
1 Set * Connection Terminal
1* Silicone Sealant
1* English Manual
All Accessories for Assembly
Notes
1. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
2. To avoid signal reduction and improve anti-jamming ability, it is better to use the customized signal cable from the flow meter manufacturer.
3. The temperature and humidity of the working environment should be in the range of technical specifications. Avoid direct sunlight on LCD.
4. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
