(Complete Set Universal Fit Above Ground Pool Skimmers (White) Pool Skimmer Accessory Kit ABS Plastic Thru-Wall Skimmer with Accessories Opening Width 6" Fits All Standard Pools Wall Cutouts

Installation Tips:

1.If your pool wall doesn’t have an existing knockout for the skimmer, use a marker to trace the outline of the gasket’s inner edge on the exterior of the pool wall.

2.Cut the vinyl liner with a utility knife.

3.Install the gasket by inserting it into the cut edge. Ensure that the side with the 5 screw holes is on the top.

4.Use the gasket as a guide, follow the empty in the gasket to pierce or drill holes.

5.Align the faceplate to the gasket from the inside wall of the pool and align the skimmer body from the outside wall of the pool.

6.Screw the skimmer body and faceplate into the pool wall using the provided stainless steel screws.

7.Place the skimmer weir into place in front of the skimmer.

8.Install the skimmer basket and then close the lid.

9.Install the fittings and adaptors as needed. You can replace the stock return fitting with the included jet nozzle for better water circulation.

10.Check for leaks. Most often, you only need to tighten the screws to stop the leaks.

(Complete Set) Universal Fit Above Ground Pool Skimmer (White) - Pool Skimmer...