Quaqdae Car COP Ignition System Detector ADD750 Automotive Ignition Coil Test Detector

Specification:
Item Type: Ignition Coil Tester
How to Use?
1. Correctly connect the connector and sensor head to the tester.
2. The induction head is aligned with the ignition coil to working, and the working status of the ignition coil is judged according to the result of lighting.
Test Results:
Red LED Light:
Consistent, steady flashing and beeping indicates the COP is producing the correct amount of voltage.
No response or an inconsistent response indicates the COP is NOT producing the correct amount of voltage.
This may be caused by one of the following:
1. Fouled , or incorrect space
2. Damaged/corroded wires or connectors
3. Faulty coil or PCM
Green LED light:
Consistent and steady flashing indicates the duration of the arc is correct.
No response or an inconsistent response indicates the duration of the arc is NOT correct.
This may be caused by one of the following:
1. Shorted windings inside the coil
2. Resistance or bad connections in the
3. primary / secondary connections
4. Faulty coil
Material: ABS
colour: As shown

Package Contents:
1 x Ignition Coil Tester(without battery)
1 x Adapter Lever
1 x Sensor
1 x Storage Bag

Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.