Electric Drill Bracket 400mm Drilling Holder Grinder Rack Stand Clamp Bench Press Stand Clamp Grinder For Woodworking ,High Strength Body

Specification:

Material: Aluminium Alloy

Max. chuck diameter: 42mm

Max. drilling depth: 60mm

Column height: 400mm

Drill boss diameter: 38-42mm

Shaft diameter: 25mm

Drilling depth: Max. 60mm

Application: Holding Electric Drill

Quantity: 1pc

Safe operating procedures

1) Check whether all parts of the drilling machine are normal before use.

2) The drill bit and the workpiece must be clamped and tightened, and the workpiece cannot be held by hand to avoid injury accidents and equipment damage caused by rotation of the drill bit.

3) Concentrate on the operation. The rocker arm and carriage must be locked before working. When loading and unloading the drill bit, do not hit it with a hand hammer or other tools or objects, nor use the spindle to hit the drill bit up and down. Use a special key and wrench to load and unload the drill clamp. The head must not hold a tapered shank drill bit.

4) A wooden backing board is required when drilling thin plates. When the drill bit is about to penetrate the workpiece, apply light pressure to avoid breaking the drill bit, damaging the equipment or causing accidents.

5) When the drill bit is running, do not wear gloves when working, and it is prohibited to use cotton gauze and towels to wipe the drill press and remove iron filings. After work, the drilling machine must be wiped clean, the power supply must be cut off, and the parts stacking and working area must be kept neat and tidy.

Package Included:

1 x Electric Drill Holder (The drill is not included)

Notice:

1. Please allow a bit error due to manual measurement. please make sure you do not mind before you bid.

2. The color may have different as the difference display, pls understand.

Related Products:bench drill,mini drill press,benchtop drill press,portable drill press,small drill press,mini drill