Features:
*With low remains design-- This solder braid helps clean spare solder on the pin away to avoid short circuit, especially great for small, hard to reach areas.
*Pure oxygen copper wire-- No clean flux for easy usage.The solder Wire Soldering can help clean some remains flux and increase the speed of cleaning the PCB pad.
*Braid design-- Copper Wire Soldering with fine braid design to promote strong capillary action to pull in excess solder.
*Oxidation resistivity, anti-corrosion protection and good thermal conductivity.
*Widely use-- Can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards,
re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard and so on.
*How to use
1) Place the Wire Soldering over the solder need to be removed and then push the heated soldering iron tip onto the Wire Soldering.
2) Remove the Wire Soldering at once when the solder has been absorbed.
3) Cut off the used part of the Wire Soldering.
Specifications:
Product name: Wire Soldering
Material: Pure copper wire
Color: Copper
Size: Line length: 1.5M/59.06in
Line Width: 1.0mm,1.5mm,2.0mm,2.5mm,3.0mm,3.5mm,4.0mm(Optional)
Working temperature: 327 degrees
Quantity: 1 pc
Package Content:
1*Wire Soldering
Note:
1. Transition: 1cm=10mm=0.39inch.
2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
3. Please allow slight manual measurement deviation for the data.
