ROMANSENTIAL 1Set Liquid Flowmeter with Flow Detection Function for Water Vending Machine Small Size

Description

The item is a professional and practical /4" water flow sensor, which is mainly consists of plastic body, rotor assembly and Hall Sensor. It is installed in the hot water inlet end for water flow. When water through the flow rotor assembly, magnetic rotor will rotate and will change as the . Hall sensor output corresponding and feedback to controller, then the controller will control the flow. It can be used for Water heaters, credit , water vending machine, flow measurement device.-garden hose quick connector

Features

- Color: mainly black.
- Material: hard plastic and stainless steel.
- and /4" External Thread Water Flow Sensor Flowmeter Hall Flow Sensor Water Control.-water meter
- Light weight, small size, and easy to install.-Water flow meter
- Inlaid with stainless steel impeller shaft, and wearable.-garden hose quick connect
- Seal Ring with the upper and lower force structure, avoid leakage. -water meter for indoor plants
- Imported Hall element, adopts pouring sealant to avoid to leak and age.-Hall flow meter
- Applied for water heater, imprinter, automatic water machine, and other flow metering equipment.-hall effect flowmeter

Specifications

- External threads: 3/4".-hall meter
- Minimum working voltage: 4.5 5V-24V.-water sensors for leaks
- Maximum operating : 15mA ( 5V).-automatic watering system
- Working voltage range: 5-18V.-liquid flowmeter
- Load capacity: less than or equal to 10mA ( 5V).- Water flow sensor 3/4"
- Working range: less than or equal to 80°C.- Water flow meter
- Working humidity range: 35%~90%RH ( ).- Hall flow meter
- Flow range: 1-60L/min.- 3/4 flow meter
- Working pressure: less than 1.20Mpa.-Water flow sensor
- Storage : -25°C to 80°C.
- Storage humidity: 25%-95% RH.

Notes

1. shock, and chemical erosion.
2. Non-throwing or hitting.
3. Mounted vertically, should not 5 degrees inclination.
4. of Medium should not 120°C.