Sewage Ejector System, HP 1/2, Phase - Pumps 1, Number of Pumps 1

These 110V sewage ejector pump systems have an alarm that turns on when the water rises to a preset level in the sump basin. This alerts that the pump has malfunctioned or is not able to keep up with the water flow. Pumps remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. They are compatible with most standard U.S. residential electrical wall outlets and have a Type A (two prongs, ungrounded) or Type B (three prongs, grounded) power cord plug.Sewage ejector pump systems remove sewage containing solids from drains where a gravity system won't work, such as in septic systems that are below the main sewer line. Sewage pump systems include items needed for a sewage ejector pump installation including alarms or check valves. Pumps have no screen on the bottom of the pump and a large outlet at the top to allow debris to flow through freely. Sewage ejector pumps are mounted in a basin where waste collects from a drain pipe and are turned on and off by an attached switch or control panel. The wastewater is then pumped out of the basin and up to the main sewer or septic line. 1/2 HP, Sewage Ejector, Max. Head 24 ft.