PWM Speed Controller 12V 4Pin PWM Fan Governor USB TYPE-C Power Supply DIY Watercooling Cooler with 1 to 3 Adapter Cable

Fan speed adjustment range 0-100%.
Turn the knob clockwise to increase the speed, Turn the knob counterclockwise to reduce the speed.
The application scenario of the governor design is mainly powered by the charging head/rechargeable battery, the common output capacity is generally 5V/2A, higher specifications are relatively rare, and the parameters of 12v/0.7A fan almost reach 5V/2A full power supply, while taking into account the small size of the PWM governor so limited cooling capacity.
It is recommended that the output current be controlled below 0.7A for short time use and below 0.5A for long time use.
Here means the current at the maximum speed, the fan current vary proportionally according to the speed.
Input voltage: 5V
Output voltage: 12V
PWM frequency: about 25KHz
Output current: rated 0.5A/maximum 0.7A
Input port: USB TYPE-C female port
Output: PWM 4Pin
Speed range: PWM duty cycle 0-100%
type: 1 to 3 Adapter cable
Colour:Black
Material:plastic

Package Contents:
1 x PWM Speed Controller
1 x USB to TYPE-C power supply cable
1 x Adapter cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.