Product Description

Thermal Grizzly Kryonaut extreme

For overclocking without compromise

Kryonaut extreme was developed to meet the highest demands in extreme overclocking. With ultra-fine particles and optimized layer thickness, the paste maximizes thermal conductivity, making it perfect for setups using liquid nitrogen or water cooling systems.

Available in two sizes: 2g | 9ml

Optimal thermal conductivity even under extreme conditions

With added nano-aluminum oxide particles, Kryonaut Extreme fills even the smallest irregularities to effectively dissipate heat. It remains stable and does not cure even at extreme temperatures, ensuring your system stays safely and powerfully cooled at all times.

Application Tools

Kryonaut Extreme 9ml includes three spatulas to facilitate the application of the thermal paste.

• My thermal paste is difficult to spread or comes off the surface. What can I do?
  

  The surface should be thoroughly cleaned and be free of grease before use. The thermal paste should be at least at room temperature when applied. It is important to spread the thermal paste very slowly during application.
  

  
  

• How long is Thermal Grizzly thermal paste usable after opening?
  

  With proper storage and packaging, the thermal paste can be used for at least 3 years without issues, and in many cases, significantly longer.
  

  
  

• Why can't I find the thermal conductivity value on the packaging?
  

  The typically theoretical thermal conductivity values vary greatly depending on the application, as important factors such as contact pressure, temperature, or surface cannot be uniformly accounted for.
  

  
  

• Should I store the thermal paste in its original packaging after use?
  

  Thermal Grizzly thermal paste packaging is specially coated on the inside to protect the syringe and its contents from UV radiation and other environmental influences. We recommend storing it in the original packaging.
  

  
  

Application of Thermal Grizzly Thermal Paste

Apply a small amount of thermal paste to the CPU

The surface should be thoroughly cleaned and free of grease before use. We recommend using TG Remove or TG Cleaning Wipes for cleaning. The thermal paste should be at least at room temperature when applied.

Spread the thermal paste

When applying, it is important to spread the thermal paste very slowly. For a typical or CPU, a single spreading motion should take about 3 seconds. The slower the movement, the easier it is to spread the paste evenly.

Technical Details Kryonaut extreme

Operating Temperature: -250°C to 350°C
Density: 3.76 g/cm³

Electrical Conductivity: 0 pS/m
Viscosity: 130 - 180 Pa⋅s