12V Submersible Pump Stainless Steel Water Oil Transfer Pump 12LPM for Kerosene Diesel Fuel with 3M Power Cord 38mm Diameter Lightweight Portable for Farm Machinery Construction Vehicles

12V submersible pump 38mm water oil delivery refueling stainless steel lighter plug
✿Product Description：
✿12V Submersible Transfer Pump Use w/, Kerosene,Water, Oil, Water 12 Litres/Min (12 LPM)
✿Pump diameter: Width approx. 38 / 1.5in
✿Pump length: approx. 11. cm / 4.4in
✿Lift: meters
✿Largest current: 1.5 Amp
✿Power Cord Length:approx. / 118.1in
✿Power cord length is 3 meters, the hose outlet diameter is 16 mm= 0.6in. Pipe not included.
✿Make sure the power supply voltage are consistant with pump voltage. The voltage tolerance is ± 5%, please notice the positive and negative.
✿Package content:
✿1 x Water Oil Car Transfer Pump
✿1 x English Instruction Product Specification :
✿-100% new and. Stability, small, lightweight , easy to carry and install. Stainless steel and screw thread interface, easy to disassemble, repair and replace. Fits for water,, kerosene.
✿-Suits for harvesters, large farm machinery, construction machinery, tractor and other vehicles which is inconvenient to refueling.
✿-It is strictly prohibited pumping gasoline, and other fluids! It can not be no-load and dry pumping.
✿- Pump should be intermittent work (that is, no more than 20 minutes to use it each, stop for 10-15 minutes and continue to work), be careful not to work long hours.Used for harvesters, large farm machinery, construction machinery,
✿tractor and other field operations inconvenient refueling vehicles and can not the gas station refueling equipment and machinery.
✿1. The pump with aluminum, increasing the thickness of the housing, making the housing more, can also the housing rust or rot.
✿. In the bottom of oil pump with stainless steel filter, to make out of (or water) cleaner. Bottom of the filter with threaded connection, easy disassembly, repair and replacement, which can reuse.
✿3. use of the pump, it should be to present pump from the oil (or water) out.
✿4. This pump should take good-owned oil hose firstly when pumping, and put the pump completely into the clear oil (or water).
✿- Gasoline, and other liquids are strictly prohibited to use this pump! Pump can not be opeated with no-load or dry pumping.
✿- Pump should be intermittent work (that is, no more than 20 minutes to use it each, stop for 10-15 minutes and continue to work), be careful not to work long hours.
✿- Make sure that if the power supply voltage same to pump voltage label, which voltage tolerance is ± 5%, and be attention to positive and negative.
✿