Eastwood Matte Gray Rust Encapsulator Plus | Long Lasting Durable Finish 1 Coat Maximum Rust Protection | Heat Resistance up to 350 degrees Fahrenheit | Quart 1 Pack

Hero image 0 of Eastwood Matte Gray Rust Encapsulator Plus | Long Lasting Durable Finish 1 Coat Maximum Rust Protection | Heat Resistance up to 350 degrees Fahrenheit | Quart 1 Pack, 0 of 3

Eastwood

Eastwood Matte Gray Rust Encapsulator Plus | Long Lasting Durable Finish 1 Coat Maximum Rust Protection | Heat Resistance up to 350 degrees Fahrenheit | Quart 1 Pack

(No ratings yet)

Key item features

RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator. This paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal.
HOW TO USE: Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron. Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel. Remove any grease, oils, or other surface contaminants
2X Stronger Than Original Rust Encapsulator
SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product. Use in a well ventilated area away from open flame. Store spray in a cool dry place.
WARRANTY: Comes with a 1-year limited warranty and 90 day return.

Specs

Color
Gray
Brand
Eastwood
Automotive body paint type
Rust Inhibitive
Finish
Matte Gray
Vehicle fitment type
Universal
Volume capacity
1 qt

Current price is $59.99

Price when purchased online

Free shipping
Free 90-day returns

How do you want your item?

Columbus, 43215

Arrives by Mon, Apr 27

Sold and shipped by The Eastwood CompanyPro Seller

4.75 stars out of 5, based on 72 seller reviews(4.8)

Report an issue with this seller

Free 90-day returns

About this item

Product details

Stop rust in its tracks with Our Rust Encapsulator. This paint-over-rust formula is the easiest way to stop rust and corrosion from forming and prevent existing rust from spreading. It seals metal parts and penetrates beneath the surface to encase rust while leaving behind a paintable surface. Rust Encapsulator can be used as a primer for a variety of topcoats or left as-is if you prefer a low-gloss finish. Ideal for chassis and undercarriage rust prevention. With high heat resistance, you can even apply it to the engine bay.

Specifications

• Matte Gray Finish
• 67% solids by weight
• Approximate coverage: 96 SQ FT per quart for one coat
• Proprietary additive increases product adhesion to rusted steel substrates- unmatched by competitive coatings
• 1 coat assures maximum protection
• Brush, roller or spray applied
• Paint Gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle
• Re-coat able after 4 hrs.- if top coating after 48 hrs., scuff surface with 320 grit paper
• 2 hrs., tack free
• Easy to apply
• Topcoat able with virtually any high-quality coating
• Maximum service temp of 350° Fahrenheit

Recommended Substrates and Prep

• Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron
• Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel
• Remove any grease, oils or other surface contaminants with a solvent such as PRE or Acetone
• Apply by brush, roller or spray

NOTE: After usage, wipe recess of can with clean rag and solvent to remove any product. If product is left in lid area recess of can and lid is re attached, the product will bond the two pieces together. This will render the product useless, as it will be very difficult to separate the lid from the can.

NOTE: It is highly recommended to use this product in conjunction with a plastic mixing cup and lid for short term storage after initial use.

RUST ENCAPSULATOR: Iron oxide is no match for our original Eastwood Rust Encapsulator. This paint-over-rust solution quickly stops surface rust before it can compromise the part’s structural integrity. Rust Encapsulator penetrates deep into the metal.
HOW TO USE: Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron. Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel. Remove any grease, oils, or other surface contaminants
2X Stronger Than Original Rust Encapsulator
SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product. Use in a well ventilated area away from open flame. Store spray in a cool dry place.
WARRANTY: Comes with a 1-year limited warranty and 90 day return.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Color

Gray

Brand

Eastwood

Automotive body paint type

Rust Inhibitive

Finish

Matte Gray

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.