7.5 HP 2" Portable Gas Powered Water Pump Gasoline Water Pump with 7.5m Water Pipe for water well intake, farmland irrigation

Description
If you're looking for a highly efficient water pump, then please take a look at our gasoline engine water pump, which is designed for farm irrigation, fire rescue, city drainage, and more. With its high head and large water flow, it can easily cope with even large irrigation areas and enhance your agricultural productivity. In addition, you can start the machine by quickly pulling the rope, bringing you an easy and comfortable user experience.

Details
Heat Dissipation Holes: This design can help the product dissipate heat in time, prevent burning, improve safety during use, and extend the product's service life.
Filter: It can prevent debris from entering the pump body during operation, extending the service life of the product.
Large Caliber Inlet&Outlet: A 2-inch diameter inlet and outlet has strong versatility and can be configured with different types of water pipes.

Application
This product is widely used for water well intake, farmland irrigation, garden irrigation, greenhouse planting, field water, fire water, ground cleaning, drainage, pool water exchange, etc.

How to Use
Place the machine flat and fill it with engine oil. Just enough for oil to drip out, too much or too little engine oil will affect the operation.
Add 90 # or above gasoline.
Fill the pump head with water until water overflows from the outlet.
Turn the red shutdown switch upwards to the "ON" position.
Connect the inlet pipe.
Connect the water outlet.
Adjust the throttle switch to the left, adjust the air vent to the left, and adjust the oil circuit switch to the right.
First, pull out a small section of the rope and then quickly pull the rope to start the machine.

Specification
Material: Aluminum Alloy, Carbon Steel, Cast Iron, Titanium Alloy Stainless Steel
Color: Red, Black
Process: Die-casting, Stamping
Style: Modern
Mounting Type: Free Standing
Fuel Type: 90# And Above Gasoline
Ignition Method: Contactless Transistor Ignition
Startup Method: Manual Startup
Engine Type: Single Cylinder, 4-stroke, Air-cooled
Power: 7.5HP
Speed: 3600rpm
Connection Dia.: 50mm/2in
Total Head: 30m/98.43ft
Fuel Consumption: 365ml/0.096Gal/KW/H
Delivery Volume: 25m³/882.87ft³/h
Suction Height: 7m/22.97ft
Fuel Tank Capacity: 3.6L/0.95Gal
Oil Capacity: 0.6 L/0.16Gal
Displacement: 212cc
Running Time: 5H
Applicable Water Temperature: -5~40℃/23~104℉
Noise Level: 66dB
Water Pipe Length: 7.5m/24.61ft
Product Size: 49*37.5*40.5cm/19.29*14.76*15.95in
Package Size: 50.5*38.5*43cm/19.88*15.16*16.93in
Gross Weight: 21kg/46.3lbs
Net Weight: 19.95kg/43.98lbs

Package Included
1* Gasoline Engine Water Pump
1* English Manual
1* Water Pipe
Other Accessories for Assembly

Notes
Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
The first use of the break-in period is 5-10 hours, and the engine oil needs to be changed, otherwise, impurities in the engine oil during the break-in period will jam the crankshaft.
Add gasoline of 90 # or above to the fuel tank of a four-stroke gasoline engine, and add engine oil to the casing. Please check the engine oil level before each use.