12V Battery Charger Maintainer 2A Automatic Smart Charger Portable Battery Repair and Desulfator for Car Truck US Plug

Battery Type: Fit all type of 6Volt and 12Volt , GEL, Flooded(Wet), Calcium type deep cycle, VRLA maintenance free lead acid batteries
Battery Capacity: 4Ah - 40Ah
Input Voltage: 100-240V AC, 50-60Hz
Output Voltage: 6V 2Amp / 12V 2Amp
Minimum start voltage: 7.0V
Charge Type: 3 fully automatic with trickle charging
Working Temperature: 65℃+/-5℃
Very simple to use this little battery charger
(1). Check your battery parameters are compatible to the charger (at the back of the charger).
(2). Connect the red clamp to the positive pole (+), black clamp to the negative pole (-).
(3). The LCD display show battery voltage, charge current and inside temperature (Temperature is for reference only, allowed tolerance).
(4). Wrong battery connection:"" display on screen.
(5). Connect the charger with AC power source, the charger start to operate.
(6). Once the battery is fully , the battery bar on screen in "FUL" status. Keep the status in 1-2 hours is highly recommended.
(7). Charging completed, remove the charger or keep connected.
Colour: Yellow
Material: Plastic
Size: 130 x 75 x 70mm
Voltage: AC110V

Package Contents:
1 x Battery charger
1 x English manual
NOTE: For 4AH-10AH battery, we suggest sue "REPAIR" mode,because the battery size is too small,use pulse charge is very good for small size batteries.

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.