JMS 2020-2021 Fits Ford Mustang Fuelmax Fuel Pump Voltage Booster V2 Plug & Play Dual Output P2020PPS20

Features:

• Adjust the Voltage Ramp In / Out time correct & eliminate fuel pressure spikes
• Single Or Dual Input/ Output Versions
• 4 models available for complete coverage
• LED to visually monitor the status Of your powerMAX Boost-A device
• New Enables 0-5V or Optional Internal Boost
• Works on all vehicles
• Domestics & Imports
• Compatible with all 12V or 16V  battery systems
• Plug & Play Versions
• Simple installation

Since 2010, PowerMAX has set the standard for Boost-A devices. PowerMAX combines the best of two worlds into one product Clean continuous voltage & the highest available amperage. PowerMAX Version 2 offers single or dual outputs along with multiple new features.

SIMPLE INSTALLATION:

• Choose the Plug & Play version or splice into your existing fuel pump, ignition system, intercooler pump or cooling fan via included installation kit.

CASE / ENCLOSURE:

• Industrial Black Heatsink With four mounting tabs.

DIMENSIONS:

• LENGTH: 47/8"
• WIDTH: 3 7/8'
• HEIGHT: 27/16"

• Compatible with all 12V or 16V battery
• systems (9.5Vto 19V)

LOWEST VOLTAGE DROP:
When PowerMax is not boosting output voltage the voltage drop across the unit is only: 0.05V
USER ADJUSTABLE OUTPUT VOLTAGE:

• Adjust the output voltage via the knobs on the front panel,
• Use the dip switches to save the voltage setting.
• Optional remote mounted voltage control knob overrides
• saved voltage setting and can be adjusted from the drivers seat.
• Adjustment range: 14.5V
• 100% = 18V, 22V, 25V or 31V (output model specific)

Status LED:

Adjustable Voltage Ramp-In / Ramp Out Model Specific:

• Three different ways to Ramp-in and Ramp-out boosted voltage.
• Ramp-in the boosted voltage over time (Ground, or 0-5V trigger).
• Externally adjustable via dip switch settings.
• Time Settings: O, 0.25, 0.50 and 0.75 seconds
• Ramp in the boosted voltage based on the 0-5VVoltage Trigger,
• Externally adjustable via dip switch settings.
• Range Settings: 0V, 0.5V, 1.0V and 1.5V
• Use the optional internal boost sensor to ramp in the boosted
• voltage based on manifold boost pressure (psi).
• Externally adjustable via dip switch settings.
• Range Settings: OV, 4psi, 8psi and 12psi

Installation Kit Included:

• Enable Wire harness, adapter fitting (1/8th NPT to barb)
• Hobbs switch preset @ 5psi (user adjustable 3-7psi), solder
• heat shrink ring terminals, heat shrink wire splices, tie straps
• self-tapping screws, vacuum line, 1/4" to 3/1 6" vacuum tee
• 3/16" vacuum tee, 3/16 to 3/8" vacuum tee and 30 amp mini-fuse.

Note: The installation kit is specific to each PowerMAX model

Brand: JMS
UPC: 021201231253

• 2020-2021 Fits Ford Mustang