3.45 in. Cone Compression Spring for Drip Tray

A compression fitting is comprised of a sleeve, a nut, and the fitting body itself. The sleeve acts as the seal when the nut compresses it into the fitting body. A drip tray is an open reservoir, sometimes with a slotted cover, designed to catch drips, as under a beer tap, beverage dispenser, etc. A drip tray must be drained and cleaned periodically, or it may be engineered with an outbound drain. A spring is an elastic object that stores mechanical energy. Springs are typically made of spring steel. There are many spring designs. In everyday use, the term often refers to coil springs. When a conventional spring, without stiffness variability features, is compressed or stretched from its resting position, it exerts an opposing force approximately proportional to its change in length.

• Height: 1.45 in.
• Width: 5.3 in.
• Length: 3.45 in.