Scapa 0485 Rubber Adhesive Strip Tape: 1/25 in. thick x 3/4 in x 66 ft. (Clear)

Scapa 0485 Rubber Adhesive Strip Tape is a very tacky rubber resin transfer tape. Its unique transferable adhesive sticks to almost anything, even when in wet or low-temperature conditions. Also referred to as a Toffee Tape. This double-sided product is an ideal choice for all your general-purpose mounting and bonding applications. Even works great on hard to bond to substrates like glitter paper (see alternative photos to see us trying to remove the invitation from the glitter paper). To remove the tape don't try and ball it up; instead pull on the tape to stretch it out lengthwise away from whatever it is stuck to. Should not be used where good chemical resistance is required though.

Uses & Applications

• Bonding lightweight wall insulation panels and kickplates.
• Securing flooring materials such as carpeting, tile and threshold strips.
• Joining of plastic sheeting and filter membranes.
• Fixing of edgings, sheeting, signs, and displays.
• Bonding trim and fabrics during furniture construction.
• Bonding interior padding in protective headgear.
• Mounting posters and other lightweight items on walls.

Features & Benefits

• Easy-to-peel oversized liner (the liner on the tape is extended so there is a 1/4 inch dry ungummed edge at both sides of the tape so the 3/4 inch tape will actually come as 1-1/4 inches since there is a 1/4 inch dry edge at both the top and bottom. The liner color may be either blue or white.
• Clean, easy to use alternative to brush on adhesives. If want to cut tape with a scissors hold tape very taught when cutting to get a nice clean edge.
• Very aggressive pressure sensitive adhesive offers excellent bond strength.
• Non-hardening and permanently flexible.
• Non-cured (NC) adhesive so it requires no cure time.
• Solvent free, therefore no fumes.
• Forms a strong waterproof bond.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 19mm wide. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: N/A (Unsupported)
- Adhesive: rubber resin based hot melt
- Release Liner: blue or white paper
- Tack: 1.18 inches (rolling ball)
- Service/Operating Temperature: up to 104F
- Thickness: 16 mils (1/64" thick) or 40 mils (1/25" thick)