Hero image 0 of JVCC UHMW Polyethylene Film Tape [10 mil carrier] (UHMW-PE-10): 1 in. x 36 yds. (Natural / Translucent), 0 of 4

JVCC

JVCC UHMW Polyethylene Film Tape [10 mil carrier] (UHMW-PE-10): 1 in. x 36 yds. (Natural / Translucent)

(No ratings yet)

Key item features

JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications.
*** Wound on either a blue film or white paper release liner.
Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications.
Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic.
Thickness: 15.8 mils (carrier, adhesive, liner) 11.8 mils (carrier, adhesive) 1.8 mils (adhesive) 10 mils (carrier) 4 mils (liner). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 60 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter.

Specs

Brand
JVCC
Features
Durable
Color
Natural / Translucent
Has written warranty
No
Weight
1.18 lb
Model
UHMW-PE-10/NATT136

Current price is $61.61

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives by Fri, May 1

Sold and shipped by FindTape.com LLC

4.492997198879552 stars out of 5, based on 357 seller reviews(4.5)

Report an issue with this seller

Free 30-day returns - in store or online

About this item

Product details

JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on either a blue film or white paper release liner. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 25.0mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: UHMW (Ultra High Molecular Weight) polyethylene film
- Adhesive: acrylic
- Release Liner: white paper or blue film
- Standards Met: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M
- Thickness: 15.8 mils (carrier, adhesive, liner) 11.8 mils (carrier, adhesive) 1.8 mils (adhesive)
- Adhesion: 50 ounces per inch (to stainless steel test panel)
- Tensile Strength: 60 pounds per inch (longitudinal)
- Service/Operating Temperature: up to 300F
- Elongation: 300 %

JVCC UHMW-PE-10 UHMW Polyethylene Film Tape is a 10 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications.
*** Wound on either a blue film or white paper release liner.
Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications.
Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic.
Thickness: 15.8 mils (carrier, adhesive, liner) 11.8 mils (carrier, adhesive) 1.8 mils (adhesive) 10 mils (carrier) 4 mils (liner). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 60 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

JVCC

Features

Durable

Color

Natural / Translucent

Has written warranty

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.