Features:
and
The PDB-XT60 has been engineered to provide the highest possible and reliability in a 36x50mm & 4 layers PCB.
It distributes power from a pack to 6 ESCs, as well as providing synchronised & regulated 5V outputs & regulated 12V for powering Cameras, Servos, receiver, Flight Controllers, Video Transmitters, LEDs, .
It a XT60 socket to the pack conveniently.
2oz , 4-layers &1.6mm PCB.
Specifications:
- Input (3S-4S ): 9 - 18V
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 6 outputs & 1 pair /GND
outputs:
- Continuous current: 25Ax4 or 15Ax6
- current (10 seconds/): 30Ax4 or 20Ax6
5V output:
- Designed for Receivers, Flight controllers, , and Servos.
- / synchronous regulator.
- : 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/)
- Output : 40mV (VIn=16V, VOut=5V@2A load)
- Short-circuit tolerant (5 seconds/)
12V output:
- Designed for Video or FPV camera with regulator.
- The battery should be 4S (13~18V )
- : 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/)
- Short-circuit tolerant (2 seconds/)
12V @ 3S
- Output voltage= 3S -1V
Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, Φ3mm
- Weight: 7.5g(/ XT60), 11g(/ XT60)
Note:
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Package includes:
1Set Distribution Board
