Foam Cutter Hot Knife Electric Foam Cutting Machine Sofoam Cutter DIY Cutting Tools Foam Cutter ,Durable Design

Thermal Cutter Hand Held Electric Hot Knife Heat Cutter Foam Thermal Cutting Tools Non-Woven Fabric Rope Curtain Heating Knife

Description:

Frequency: 50/60HZ

Temperature adjustment: adjustable

Blade Max temperature: 600 degree

Packa size: 36cm*22cm*12cm

Net weight: 1.5kg

1 - The Thermal Cutter (Hot knife) blade have a sharpened ed, for the cleanest cut always cut in the direction on the sharpened ed.

2 - Excessive power output and heat neration may cause the blade holders to overheat resulting in dama to the unit. Use only the power output for proper cutting. The blade does not need to be red hot to move through foamed plastics.

Caution:

- Always operate the Thermal Cutter (Hot knife)in well ventilated space

- Never burn off excess residue on the hot knife blade. The blades will overheat, warping the blade and potentially overheating the Thermal knife

- Keep hot blades away from skin, clothing and other flammable materials.

- Allow blades to cool before handling. A hot blade may cause injury or burns to exposed surfaces.

NOTE:

- For the best results, practice on scrap pieces of Film&Fabrics

When cutting foam it is best to keep the temperature and speed consistent If smoke develops during the cut you are cutting too slow or the blade is to hot which could result in an oversized, uneven cut. This can be remedied by lowering the temperature and intermittently releasing the trigr during your cut. As the cutting resistance increases, depress the trigr again. The Thermal Cutter (Hot knife)will reach the set temperature within seconds. You can accomplish your cut with minimal smoke using this process. Cutting in this manner will also prolong the life of the knife.

Operation:

-Put your temperature control knob at midran setting, place the blade against the ed of the foam and depress trigr. cutting should be virtually smoke free.

- Releasing the trigr approximately one or tow inches prior to the completion of the cut will help keep the blade clean and free from buildup