EVA5 Huafei FPV5 inch Crossover Machine XH Rack Professional Aerial Photography HD Explosion resistant Compatible with DJI O3 O4

1. EVA 5-inch rack, made of 3K carbon fiber, with a height of 25mm inside the rack, wheelbase of 230mm, and dimensions of 138 * 184mm 2. It is recommended to use 5-inch blades (usually between 125-130mm) DC structure: the recommended diameter range is 130mm ± 3mm XH structure: recommended diameter range 3. GPS adaptation size: 25 * 25 * 8mm, antenna compatible with mouse tail/lollipop antenna 4. Lens width: 19-20mm, carbon fiber is used on both sides of the camera; The screw reinforcement position is printed with TPU material to provide shock absorption 5. Flight control hole position: 30.5 * 30.5mm/20 * 20mm Image transmission hole position: 30.5 * 30.5mm/20 * 20m 6. Motor hole position: 16 * 16mm, compatible with brushless motors 2205/2206/2207/2305/2306 7. The empty space of the capacitor can be used for DIY printing, with the option to install a buzzer 8.8. Packaging details: Top plate * 1 (thickness 2.5mm) Medium board * 1 (thickness 2.5mm) Bottom plate * 1 (thickness 2mm) Arm * 4 (thickness 5mm) Lens left and right fixing plate * 2 (thickness 2.5mm) Battery anti slip pad * 1 Battery fixed strip * 1 TPU motor protection pad * 4 TPU sports camera base * 1 TPU camera fixing parts * 2 TPU Head Protection Component * 1 TPU - Body Side Panel Protection * 2 TPU tail protection component * 1 TPU buzzer fixture * 1 TPU-GPS+antenna fixing component * 1 TPU-T antenna fixture * 1 M3x25 mesh aluminum pillar 8 M3x12 * 4 (flat head screw) M3x10 * 4 (flat head screw) M3x6 * 4 (flat head screw) M3x6 * 14 (round head screw) M2x8 * 4 (flat head screw) M3 compression nut * 10 M2 through-hole nut * 4