Heavy Duty Jump Starter Replacement Cables 12V Car Battery Booster Jumper Emergency Cable

Specification

Model: A1

Color: Black / Red

Wire Gauge: 10 Awg

Assembly Required: No

Applicable: Ec5 Socket Power

Material: Copper, Abs

Voltage: 12v

Peak Current: 600a

Total Wire Length: About 45cm/17.72in

Weight: 0.19kg/ 0.42 Lbs

Battery Clamp Length: 9.5cm/3.74in

Product Size: 10*4.5cm/ 3.94*1.77 in

Package Size: 20.9*7*2cm/8.23*2.76*0.79 in

How to Use

Add the Red Collet to the Positive Terminal of the Car Battery, and the Black Collet to the Negative Terminal of the Car Battery.

Ec5 Plug into the Emergency Starter Power Starts Port.

The Battery Clamp Work Light Becomes Red and Green Alternately, Indicating the Correct Connection.

Within 30 Seconds After the Battery Clamp Is Connected Correctly, Go to the Car to Start Car. (Before Starting, Please Turn off the Air Conditioning, Audio, and High-powered Electrical Equipment; some Cars Need to Open the Car Headlights Before Starting.) .

Within 30 Seconds After the Successful Start, Please Release the Battery Clamp from the Car Battery.

Package Included

1* Battery Clamp

Key Features

Anti-short Circuit: Battery Clamp Positive and Negative Electrodes with Electric Misclip Short Circuit Protection. When the Positive and Negative Clamps Are Connected Together, It Will Automatically Disconnect.

Anti-reverse Charging: This Product Can Block the Car Battery to the Emergency Power Reverse Charging, so You Do Not Have to Worry About the Car Power Will Be Charged less and less.

Anti-reverse Connection: When the Two Are Accidentally Connected Incorrectly, the Starter Power Supply and the Positive and Negative Clamps Will Automatically Power off to Ensure Safety.

Anti-over-discharge: When the Starting Power Circuit Is Too Low, This Product Will Issue a Reminder, Such As Starting Again Will Damage the Power Supply.

Anti-overcurrent: If the Starting Power Supply Current Is Too Large When Starting the Car, This Product Will Send a Reminder and Terminate the Operation, Which Can Protect Your Car and Power Supply Well.

Stable Voltage: This Product Has a Stable 12v Voltage, It Can Supply Power Smoothly to Protect the Car Starter.

Timeout Disconnect: the Product Will Be Automatically Disconnected After 3 Seconds of a Successful Startup. It Can Effectively Protect Your Battery and Personal Safety.

Overheat Protection: When the Product Is Started Several Times and the Temperature Is Too High, It Will Automatically Stop to Protect the Battery and Pcb Board.

Details

Color Distinction: the Red Clamp Is the Positive Pole and the Black One Is the Negative Pole. the Two Clearly Colores Allow You to Easily Distinguish.

Groove Pattern: the End of the Battery Clamp Has a Groove Pattern, Which Can Effectively Increase Friction and Make the Clip Easier to Hold and Use.

Pure Copper Gold Plated Interface: the Pure Copper Gold-plated Interface Has the Advantages of Low Resistance, Good Conductivity, Low Heat Generation, and Long Life.

Highly Flame Retardant Pcb Board: the Pcb Board Built into the Product Is Not Only Highly Flame Retardant, but It Is Also Very Precise and Maintainable. Once a Failure Occurs, It Can Be Replaced Efficiently, Quickly, and Easily.

Application

This Product Is Suitable for Ec5 Port Power. It Is Suitable for 12v Gasoline Vehicles and Is Compatible with Most Car Mini Jump Portable Starters and Mobile Chargers and Can Start Faster When Fully Charged with 4 Cells.