Hero image 0 of Spot Weld Dent Puller Portablel Stud Welder Dent Repair Kit for Car Truck Van Dent Repair 110V, 0 of 18

Spot Weld Dent Puller Portablel Stud Welder Dent Repair Kit for Car Truck Van Dent Repair 110V

(No ratings yet)

Key item features

【High Quality】: Small welding spot and small consumables loss, no damage to the anti-rust paint behind the sheet metal, less damage to the original bodywork and stronger welding.
【Manually/Automatically Welding】: The host automatically detects the short-circuit condition of the welding gun, and a welding spot is generated within 1 second. Disconnect the welding gun and the welding part for 0.5 seconds, then the next point can be welded, and others can be welded in sequence. When switches to manual mode, use the gun switch to control welding.
【Firm Welding】: High strength thickened case with thickness up to 1.8mm. Using flexible voltage technology, it can still be welded firmly when the voltage is low to 155V.
【Easy to Operate】: Push-button control panel, simple function selection, easy to operate. It can easily cope with a variety of complex welding needs,which is the ideal product for dent pulling and straightening of low thickness car body elements, such as bonnet, door, roof panel and wings.
【Application】: This welding machine is designed to perform operations in the car body repair shop,especially in the maintenance of steel car bodies. Featured with short welding time,little heat impact on the base material, no damage to the base material surface, good welding quality.

Specs

Automotive dent puller type
Spot Weld Dent Puller
Brand
Maisutseb
Material
Stainless Steel
Rec. use
Automotive
Features
Easy Installation
Weight
74.3 lb

Current price is $429.00

Price when purchased online

Free shipping
Free 30-day returns

How do you want your item?

Columbus, 43215

Arrives between May 9 - May 12

Sold and shipped by SuperLeadDX Co.Ltd

4.217391304347826 stars out of 5, based on 23 seller reviews(4.2)

Report an issue with this seller

Free 30-day returns - in store or online

About this item

Product details

Introduction:
The machine is the ideal product for dent pulling and straightening of low thickness car body elements, such as bonnet, door, roof panel and wings.
This welding machine has many advantages such assimple operation, short welding time, little heat impact on the base material, no damage to the basematerial surface, good welding quality, firmness, beautiful appearance, and energy saving. lt is the most ideal equipment especially in the maintenance of steel car bodies.

Product parameter:
Input Voltage: 110V
Power: 3KW
Welding Thickness: 0.4 to 1.2mm
Instantaneous Maximum Current:6800A
Current: 77 Gears Operation

Panel Operation:
1.Connect the product to a suitable power source, and then press the switch todisplay: function (left) power (right).
2.To adjust the power intensity (current size), press the + or - button.
3.To change the function, press the function selection key.At this time, you can usethe + and - buttons to select the function number.
4.Manual welding and intelligent welding:
---When using manual control, connect the torch switch connector and switch theswitch to manual mode.
---When using smart mode, there is no need to disconnect the torch switchconnector and switch the switch to smart mode.

Welding Operation:
The machine can be welded manually/automatically, and the host automatically detects the short-circuit condition of the welding gun, and a welding spot is generated within 1 second. Disconnect the welding gun and the welding part for 0.5 seconds, then the next point can be welded, and others can be welded in sequence. When switches to manual mode, use the gun switch to control welding.

Item Number:
1* 90EL Steel Dent Pulling Machine 110V (033249)

【High Quality】: Small welding spot and small consumables loss, no damage to the anti-rust paint behind the sheet metal, less damage to the original bodywork and stronger welding.
【Manually/Automatically Welding】: The host automatically detects the short-circuit condition of the welding gun, and a welding spot is generated within 1 second. Disconnect the welding gun and the welding part for 0.5 seconds, then the next point can be welded, and others can be welded in sequence. When switches to manual mode, use the gun switch to control welding.
【Firm Welding】: High strength thickened case with thickness up to 1.8mm. Using flexible voltage technology, it can still be welded firmly when the voltage is low to 155V.
【Easy to Operate】: Push-button control panel, simple function selection, easy to operate. It can easily cope with a variety of complex welding needs,which is the ideal product for dent pulling and straightening of low thickness car body elements, such as bonnet, door, roof panel and wings.
【Application】: This welding machine is designed to perform operations in the car body repair shop,especially in the maintenance of steel car bodies. Featured with short welding time,little heat impact on the base material, no damage to the base material surface, good welding quality.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Automotive dent puller type

Spot Weld Dent Puller

Brand

Maisutseb

Material

Stainless Steel

Items included

1* 90EL Steel Dent Pulling Machine 110V (033249)

Warranty

Warranty information

30 days return; 6 months' warranty for the machines, not for the consumables and lifetime technical support.

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.