For 26" 48V 1500W E-Bike Fat Tire Bicycle Rear Wheel Hub Motor Conversion Kit

Details:

• Brushless and Gearless Motor: The brushless and gearless motor is fast and produces little noise when used. It can make your riding experience better.
  
  
  

• Anti-slip Design: There is an anti-slip pattern on the handle of the turner, which can play a good anti-slip effect. You can use it more comfortably and safely.
  
  
  

• Pedal Assistant Sensor: It senses the rhythm of the pedal and adjusts the speed of the motor accordingly. This helps on long trips and avoids the wrist pain caused by constant pressure.

• Controller Bag: This can be convenient to store the controller. It is also very good-looking and stylish.
  
  
  
  

  
  
  
  
  

Application:

It is suitable for retrofitting the rear wheel of a two-wheeled snow bike. It is suitable for 26-inch snow bikes with 26*4.0 tires.

Specification:

Color: Black

Material: Aluminum, Iron, Copper, Magnet Steel

Voltage: 48V

Power: 1500w

Power Source: DC

Meter Type: LCD

Power Type: Lead-acid or Lithium Battery (Not Included)

Installation Position: Rear

Motor Type: Brushless and Gearless 205 Series Hub Motor

Motor Net Weight: 7kg/15.43lbs

Motor Net Weight (with Variable Speed Gear and Disc Brake Rotor Type):7-7.5kg/15.43-16.53lbs

Motor Diameter: 24.3cm/9.56inch

Motor Shaft Diameter: M14

Motor Shaft Length: 24cm/9.44inch

Motor Cable Length: 100cm/39.37inch

Number of Sensors: 3

Rated Speed: 500rpm

Rated Torque: 55nm

Body Size of Magnet: 13.65*3*35mm/5.37*1.18*13.77inch

Number of Magnets: 46

Flat Fork Width Requirement: Min.17cm/6.69inch

Brake: Disc Brake Rotor Type Can be Installed 6 Screws

Braking Method: Disc Type

Corresponding Controller: 48V 1500w Controller

Available Aluminum Wheel Size: Suitable for 26-inch Snow Bike 26*4.0 Tires

Instrument Function: Fault Display, Speed Display, Mileage Display, Voltage Display, Five-speed Power Steering, Fixed-speed Cruise Control

Efficiency: ≥82%

Motor Wheel Speed: Max 55km/h (180446ft/h) (Speed is Related to Wheel Size, Road Condition, Battery Condition, Guest Load, Wind Speed, and Other Factors)

Net Weight: 11.5kg/25.3lbs

Gross Weight: 13.7kg/30.2lbs

Wheel Diameter: 57.3cm/22.56inch

Wheel Width: 24cm/9.45inch

Package Size: 61*61*28cm/24*24*11inch

Encasement list:

1* Rear Motor Wheel

1* Turner

1* Controller

1* LCD Meter

1* Brake Handle

1* Turnbuckle Cover

1 Set* Cables

1 Set* Pedal Assistant Sensors

2* Wiring Boxes

10* Tie Stickers

1* Controller Bag

1* English Manual

Reminder

1. It is suitable for the rear wheel of a two-wheeled snow bike. It cannot be used for three-wheelers or multi-wheelers.

2. Please prepare 4 lead-acid batteries or a lithium battery of corresponding voltage in advance.

3. Please make sure a solid connection between the motor and the controller.

4. Please make sure that the inner core of each plug is not damaged, broken, or bent.

5. If your kit has been in use for a while and then suddenly stops working. It could be that your motor plug is soaked in water. Please unplug it and let it dry. Then put it back in place and it will work fine.

6. You need to connect the machine correctly and firmly during installation so that the product can work properly. If there is a mistake during the installation process, the product will not work properly. After the installation is completed, you can check whether the error code is displayed on the LCD screen.