Marshall Excelsior ME1654P Soft Nose POL Male Fitting

Features

Marshall Excelsior Excess Flow POL Adapter

The ME1654P Soft-Nose POL Adapter is machined of solid brass (excluding the plastic handwheel)

The 1/4 inch MNPT fits the inlet of all standard low pressureregulators

The handwheel nut is left hand thread and fits all standard LP gas cylinder valves

The ME1654P has a user friendly plastic handwheel that does not require a wrench Caution: do not use Soft-Nose POL's in any installation where extreme vibration is present

Marshall Excelsior Excess Flow POL Adapter. The Soft-Nose POL Adapter is machined of solid brass (excluding the plastic handwheel). The 1/4 inch MNPT fits the inlet of all standard low pressureregulators. The handwheel nut is left hand thread and fits all standard LP gas cylinder valves. This has a user friendly plastic handwheel that does not require a wrench. Caution: Do not use Soft-Nose POL's in any installation where extreme vibration is present. Replace O-ring at first sign of wear. Turn valve off when not in use. Check the handwheel to be sure it is tight in cylinder valve before lighting appliance. When installing POL into regulator inlet, it isrecommended that Teflon tape be used instead of thread Sealant If thread sealant is used, extreme caution should be taken that no thread sealant gets in the regulator inlet. FF Soft Nose POL x 1/4 inch Male Pipe Thread, plastic handweel (WF)..