Hero image 0 of INTBUYING Mountain Bike Modified Kit 26" Bicycle Wheels Electric Bike Conversion kit Bicycle DIY Modified, 0 of 6

Intbuying

INTBUYING Mountain Bike Modified Kit 26" Bicycle Wheels Electric Bike Conversion kit Bicycle DIY Modified

(No ratings yet)

Key item features

【High-quality】This bicycle motorized kit is 48V-60V 500W, which can make your ebike reach the speed of 40-50km/h.
【Easy to use】Turn on the switch and the motor starts to rotate. If the wheel rotates in a forward direction, the debugging is successful; if the wheel rotates in a reverse direction, unplug the identification wire and connect it again until it turns in the forward direction and the debugging is successful.
【Safe And Reliable】The square wave controller has multiple protection functions to protect the vehicle electronic control system and driving safety.
【Motor debugging】After the debugging is successful, separate the two identification wire, turn the knob to confirm the success, turn off the switch, and connect other wires as needed. (When the motor is rotating forward, separate the identification wire without turning off the power supply, the motor will stop rotating, and the motor will be fully controlled by the handle at this time. Turn off the power supply and the commissioning is completed.)
【Widely Used】Adapt to more models: most of the mountain bikes, commuter cars, road bikes and folding bikes on the market.

Specs

Watts
500 Watts
Bicycle wheel diameter
26"
Motor placement
Front Wheel
Volts
48 V
Bicycle type
Mountain Bikes
Brand
Intbuying

Current price is $229.00

Price when purchased online

Free shipping
Free 30-day returns

Pro Bicycle Assembly

Home Electric Bicycle Assembly - $135.00

How do you want your item?

Columbus, 43215

Arrives between May 1 - May 4

Sold and shipped by TOPSELLER INC.

4.348880597014926 stars out of 5, based on 536 seller reviews(4.3)

Report an issue with this seller

Free 30-day returns

About this item

Product details

Descriptions:
The kit can help you to put his beloved mountain bike into a mountain electric bikes, it combines the advantages of mountain bike and electric cars, can meet the requirements of cycling exercise and be convenient for you to travel and desire, at the same time, you can also through the process of self adapted mountain bike, enjoy the fun of DIY！
The kit is front wheel
Electrical machine：48V—60V 500W
External dia of tyre：24 inches (After installing the tyre)
Note: battery is not included.

Front drive opening requirements：
V brake minimum opening: 88mm
Disc brake minimum opening: 100mm

Applicable braking method:
Disc brake pad screw hole to hole distance requirements: 44mm

Installation instructions
1. Install tires, disc brakes, motor wheels.
2. Install the battery and replace the speed control handle.
3. Wiring the controller, install the controller hanging bag.

Note:
1. Electric bicycles use direct current, the positive and negative poles of the power supply must be connected correctly (red is the positive pole, and black is the negative pole).
2. Make sure the current is no smaller than 20A or the motor will not work.
3. Install circle is the most easy to appear problem, if the disc brake and disc brake device is not aligned, you can through the gasket to adjust.

Item Included:Y-141106
INTBUYING Mountain Bike Modified Kit 26" Bicycle Wheels Electric Bike Conversion kit Bicycle DIY Modified

【High-quality】This bicycle motorized kit is 48V-60V 500W, which can make your ebike reach the speed of 40-50km/h.
【Easy to use】Turn on the switch and the motor starts to rotate. If the wheel rotates in a forward direction, the debugging is successful; if the wheel rotates in a reverse direction, unplug the identification wire and connect it again until it turns in the forward direction and the debugging is successful.
【Safe And Reliable】The square wave controller has multiple protection functions to protect the vehicle electronic control system and driving safety.
【Motor debugging】After the debugging is successful, separate the two identification wire, turn the knob to confirm the success, turn off the switch, and connect other wires as needed. (When the motor is rotating forward, separate the identification wire without turning off the power supply, the motor will stop rotating, and the motor will be fully controlled by the handle at this time. Turn off the power supply and the commissioning is completed.)
【Widely Used】Adapt to more models: most of the mountain bikes, commuter cars, road bikes and folding bikes on the market.

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Watts

500 Watts

Bicycle wheel diameter

26"

Motor placement

Front Wheel

Volts

48 V

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.