2Packs 33ft x 0.4in x 0.006in (10M x 10mm x 0.15mm) Double Side Thermal Conductive Tape High Performance Heat Resistant Fiberglass Adhesive for Electronics & DIY

Product Features
​● High tacky thermal conductive PSA. Only pressure is needed to form an excellent bond and a thermal interface
​● Thermal conductivity, insulation, buffering, and high tacky performance make it the best choice for electronic applications.
​● Flexible and conformable. Ideal for uneven surfaces.
​● Stable and economical with different thicknesses and constructions.
​
​Product Parameters
​Tape carrier: Glass Fabric
​Adhesive: Thermally Conductive PSA
​Release Liner: Blue PE Film
​Length: 33 feet (10 meters)
​Width: 0.4 inches (10mm)
​Thickness: 0.006 inches (0.15mm)
​Thermal conductivity: 1.2W/m-k
​Adhesion: 12N/25mm
​Withstand voltage: 3.5KV/mm
​Temperature resistance (short term): 120°C/248°F
​Temperature resistance (long term): 80°C/176°F
​
​Application
​● Assembly of LED light bar module and metal frame bezel.
​● Assembly of DDR-RAM module and heat sink.
​● Electronic components: IC, COP, CPU, MOS, etc.
​● M/B, PS, PCB, LCD, PDP, PC, etc.
​
​Notes
​● Please keep the glue surface clean and dry.
​● After peeling off the thermally conductive double-sided adhesive release paper, press the double-sided thermally conductive adhesive evenly with your fingers (with a little force).
​● Tape takes 72 hours to reach maximum bond strength.
​● Try to avoid touching the tape with your hands. You can press harder to increase the adhesion between the tape and the object.
​● In the case of low temperature in winter, when using thermal conductive tape, it is a small trick to heat to increase the viscosity of thermal conductive double-sided tape.
​
​Package Include
2 Rolls x Fiberglass Thermal Tape (33ft/10m x 0.4in/10mm x 0.006in/0.15mm)