Features:
*Made of good quality material that is, wear resistant, not easy to break, and has a long service.
*Can protect your knuckles or fingers from pinching when changing tires and motorcycle inner tubes.
*Easy to install. Guides the inner tube valve stem right through the rim hole for you.
Specification:
*Material: Metal
*Color: RED/Blue
*Size: 13x12x80mm/ 0.51"x0.42"x3.15"(L*W*H)
*Thread Size: M5x0.7
Installation:
Remove the inner tube valve core using the tip of the Valve Fishing Tool or use the bonus valve stem cap.
Slide the inner tube valve stem nut over the threaded brass head of the tool and onto the wire.
Push the threaded brass head through the rim hole.
Thread the brass tool head into the valve stem.
Push the valve stem back inside the tire and towards the rim hole.
the pull handle to remove any twists or kinks in the wire before gently pulling and watch as the inner tube valve stem is guided quickly and painlessly through the rim hole.
Install the valve stem nut, and unthread the tool.
Package content:
1*Valve Stem Fishing Tool
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
