3-Tier Pot Lid Storage Rack, Pots and Pans Storage Rack, No Drilling Adhesive Wall, for Kitchen Organization and Storage, Black

Product details Parts List: 1x Wire frames made of iron 3 x Wire racks made of iron 3 x Self-adhesive tape 3 x Expanshion Rubber Nails 3 x M4 self-tapping screws [Assembly Method 1] 1.Chooso a suitable location on the wall and mark the position of the hole with a pen 2.Drill 4MM holes in the marked locations with a hand drill 3. Tap the expansion gel completely into the drilled hole with a hammer. 4.Align the wire frame with the fixing holes, use a screwdriver to tighten the self-lapping screws to expand the adhesive particles, fix the wire frame 5. Align the wire rack with the fixing hole,Press hard to the bottom, installation is complete [Assembly Method 2] 1. Choose a suitablo location on the wall to poute the above self-stickors (1)Clean the wall and koop it dry befor pasting it (Tear off the isolation paper and avole touching the stickyAdhosive ourface) (3) Press firmly when pasting to make the Intemal air (4)Frese firmly when sticking to make the inleral air vonting. 2. Put the following two self-adhesive mounted wireframes and fasten the wrie framos with nuts.on the top self-adhesive, use a pen to mark the Mark with a pen the position of the bottom two self-adhesives 3. Remove the wire frame, put the following two self-adhesive stickers in the marked position according to step one. Note: Self-adhesive should be used on flat and dry surfaces, such as tiles/ wooden boards/metal/glass sunfaces, etc. Unsuitable wall surfaces include wallpaper/powder fall walls and uneven walls 4. Fix the wire frame to the wall with self-adhesive nuts. on the wall with self-adhesive nuts 5. Align the wire rack with the fixing hole,Press hard to the bottom, installation is complete