4-Blade Farm Hay Cutter with Conveyor Belt for Cutting Grass/ Kneading Silk 400-800KG/H 220V 2.2KW

Description:
This hay cutting machine is suitable for crushing various grass, corn, wheat, peanuts, beans, straw, potatoes, carrots, cassava and other root crops.The processed feed is more convenient for storage. It is a necessary machine for farmers, small and medium-sized feed processing plants and farms;
At the same time, the Hay pulverizer can also be used together with the feed granulator to facilitate the feed machine to shape the feed into granules.
If you need feed pellet machine, please feel free to contact us.

Parameters
Voltage: 220V
Power: 2.2KW
Output: 400-800KG/H
Feed hopper size: 14.56in*14.56in(37cm*37cm)
Number of blades: 4-blade
Material: Cast iron spray painting
Material crushing degree: 5-15MM
Applicable: Farms, Home Use, Retail

Note:
Different places have different Receptacles. Please note this plug and consult your electrician before purchase.
We suggest directly removing the plug and connecting it to the household power supply for safer and more stable use.

Note:
1. In addition to commissioning according to the commissioning method, before starting, the machine must be carefully checked to see if there are tools and objects hindering the start-up and operation, and whether the upper casing is locked.
2. Before starting the machine, it is necessary to check whether there are sundries in the machine. Except for processing straw, nothing is allowed to be stacked on the feeding table.
3. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation.
4. When the machine is operating, it is forbidden to stand at the grass outlet to prevent flying objects from hurting the body.
5. Operators are not allowed to wear gloves, sleeves must be fastened, and those with long hair must wear safety helmets. All personnel must leave the rotating plane of belt and rotating parts.
6. Feed crops evenly, not too much, so as not to block the feed inlet. The operator's hand shall not be close to the feeding belt during operation.
7. In case of blockage, stop the machine immediately. After the machine stops stably, open the upper cover, clean the blockage, and then restart.
8. Always pay attention to whether there is abnormal sound during the operation of the machine. Shut down and power off immediately in case of abnormality.
9. There shall be no mortar, sand, stone, iron wire, tool parts or other sundries in the crops to be processed to avoid damage to the machine or accidents.
10. At the end of each shift, the power supply must be cut off after all the crops on the feeding table are fed and no more materials are thrown out at the outlet.

Item Included: 239902-TopY
INTBUYING 4-Blades Hay Cutter with Feed Hopper Feed Inlet Conveyor Belt