20 Ton Hydraulic Portable Ram Lifting Cylinder Stroke Porta Power Jack Tool

This is a hydraulic cylinder jack with a lifting capacity of 44092 pounds. This jack is made of a variety of strong and durable 45 steel, so it has a strong lifting force. The powerful lifting force enables it to lift a variety of very heavy items quickly and firmly. The compact design is not only very portable but also allows it to work in narrow spaces. This hydraulic jack is often used in industries such as electric power, chemical industry, steel, bridges and machinery.

Specification

Model: FRY-20

Color: Orange

Product Type: Hydraulic Jack

Main Material: 45 Steel

Range of Application: Lifting Equipment

Oil Capacity: 41cc

Section Quantity: 2

Connector Model: ZG-3/8

Use Angle: 360 Degrees

First Section Tonnage: 20T/44092lbs

Second Section Tonnage7T/15432lbs

Total Tonnage: 20T/44092lbs

First Section Stroke: 1cm/0.39inch

Second Section Stroke: 1.6cm/0.63inch

First Section Piston Diameter: 5cm/1.97inch

Second Section Piston Diameter: 3.1cm/1.22inch

Total Stroke: 2.6cm/1.02inch

Closed Height: 5.7cm/2.2inch

Product Size: 10*7.6*5.7cm/3.9*3*2.2inch

Package Size: 18.5*10*6.5cm/7.28*3.94*2.56inch

Gross Weight: 3kg/6.6lbs

Net Weight: 2.8kg/6.17lbs

Package Included

1* Hydraulic Cylinder Jack

Notes

1. For proper operation, all cylinders need to be connected to a solid lifting surface. Using thin cylinders on sandy, muddy or loose surfaces can cause cylinder damage.

2. This jack needs to be used with a pump. The pump is not included in the package.

3. This multi-section jack's pistons will not retract automatically after use, so you need to retract them manually.

4. It is normal for hydraulic products to have slight oil leaks due to the long-term transportation process. When not using the hydraulic pump, please tighten the sealing plug and seal the joint with a small bag and rubber band to avoid oil leakage.

5. The bottom should be flat and tough when using hydraulic jacks. For the safety of use, it is recommended to use oil-free wood, which can expand the pressure-bearing surface. In addition, to avoid sliding, you can not use iron plates to lift things.

6. Please lift the weight slightly before use to check for any abnormality. After checking, please raise the object steadily. Do not arbitrarily lengthen the handle or excessive operation.

7. When multiple hydraulic jacks are working at the same time, someone should direct them to move up and down at the same time. Two adjacent hydraulic jacks need to be supported by wooden blocks to ensure that the gap does not slide.

8. When using hydraulic jacks, please always pay attention to the sealing parts and pipe connections to ensure their safety and reliability.

9. The hydraulic jack is not suitable for use in places with acid, alkali, or corrosive gases.

10. It is not suitable for automobiles.

11. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.