Specifications:
Main material: PCB+iron
Color: black
Battery: 1 * lithium battery, 3000mAh (included)
Measurement frequency range: 50KHz-3GHz
Frequency tolerance: <2ppm
Frequency stability: <0.5ppm
System dynamic range (calibration): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 noise floor (calibration): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Sweep rate: 100 points / second
Display: 4.0 inch, 320 * 480
USB interface: Micro USB
Power supply: USB, maximum charging current 1A
Battery connector: JST-XH 2.54mm
Maximum sweep points (on device): 201
Maximum sweep points (USB): 1024
Port 2 return loss (1.5GHz): 20dB typ
Port 2 return loss (3GHz): 13dB MIN
Item size: 117 * 85 * 25mm / 4.6 * 3.3 * 1.0in
Item weight: 368g / 13.0ounce
Package size: 215 * 137 * 85mm / 8.5 * 5.4 * 3.3in
Package weight: 972g / 2.1lb
Packing List:
1 * SAA-2N Host
1 * Micro USB Data Cable
2 * 500mm N-type Male to Male RG142-PUR RF Cable
1 * N-type Male Calibration Kit-OPEN
1 * N-type Male Calibration Kit-SHORT
1 * N-type Male Calibration Kit-LOAD
1 * N-type Female to Female Connector
1 * EVA Storage Bag
1 * Touching Screen Paddle and Lanyard
Specifications:
Material: PCB+metal
Main color: black+gold
Measurement frequency range: 50KHz-3GHz
System dynamic range (after calibration): 70dB (50k to 1.5GHz); 60dB (up to 3GHz)
S11 noise floor (after calibration): -50dB (up to 1.5GHz); -40dB (up to 3GHz)
Sweep rate: 100 points / second
Sweep points (on device): 10-201 points, adjustable
Sweep points (USB): 1-1024 points, adjustable
Power supply: USB, 4.6V5.5V
RF port: SMA
USB interface: Micro USB
Display screen: 3.2-inch TFT
Battery: 1 * lithium battery, 1950mAh (included)
Port 2 return loss: 13dB (up to 3GHz), 20dB (up to 1.5GHz)
Display tracking: 4, Marking: 4, Setting save: 5
Operating ambient temperature: 0-45
Item size: 115 * 80 * 27mm / 4.5 * 3.1 * 1.1in
Package size: 180 * 120 * 35mm / 7.1 * 4.7 * 1.4in
Package weight: 330g / 11.6ounce
Packing List:
1 * Vector Network Analyzer
2 * 300mm RF Cable SS405 SMA Double Male Needle
1 * USB Data Cable
1 * Calibration Kit (50 Load)
1 * Calibration Kit (Short)
1 * Calibration Kit (Open)
1 * SMA Female to Female Connector
Specifications:
Material: aluminum alloy(case)
Main color: black
Battery: 1 * lithium battery, 5000mAh
Frequency: 50kHz-3GHz
RF output power: -9dBm (error within 1GHz: ±1dB)
Frequency accuracy: <0.5ppm
S21 dynamic ranges: 70dB (1.5GHz), 60dB (3GHz)
S11 dynamic ranges: 50dB (1.5GHz), 40dB (3GHz)
2-port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
Number of calibration points: 101 points
Number of scanning points: 101 points
Number of traces: 4
Number of mark points: 4 (the mark point bar can be moved up and down on the screen)
USB interface: USB Type-C communication mode: CDC (serial)
Setting save: 5 groups (after saving, it can be directly recalled when it is used again, no need to recalibrate, and the saved parameters before the last shutdown will be automatically recalled when it is turned on again)
Support calibration result interpolation, can measure without recalibration after adjusting the measurement frequency band
Scan time: about 1.9s/1 time (50kHz~3000MHz full frequency band)
Item size: 140 * 73 * 20mm / 5.5 * 2.9 * 0.8in
Item weight: 270g / 9.5ounce
Packing size: 250 * 150 * 50mm / 9.8 * 5.9 * 2.0in
Packing weight: 500g / 1.1lb
Packing List:
1 * Host
1 * SMA Open Calibration Kit
1 * SMA Short-circuit Calibration Kit
1 * SMA 50 Load Calibration Kit
1 * SMA-KK Double-Head Female Hole Adapter
1 * SMA-JJ Double-Head Male Pin Adapter
1 * SMA-JKW Elbow Outer Screw Inner Hole To Inner Screw Inner Needles Adapter
2 * 200mm SMA-JJ RG405 RF Cable
1 * USB Type-C Data Cable
1 * Stylus
Related Products:
spectrum analyzer,antenna analyzer,network analyzer,rf spectrum analyzer,vector network analyzer,nanovna antenna analyzer,antenna analyzer ham radio,nano vna antenna analyzer,wifi signal analyzer,power analyzer,network tool kit,signal generator
