ZFYXGS Submersible Pond Lights Remote Control 13 Led Bright Rgb Led Light Double

Submersible Pond Lights Remote Control 13 Led Bright Rgb Led Light Double
Features:
13 LED Newest Submersible Lights with Big Suction Cups: IP68 submersible lights with big strong suction cups, and upgraded full structure, it works well in both wet and dry places, such as swimming pool light,pond light, bathtub,hot tub,, aquarium, fish tank, vase, flower pot,and hallway, basement, garage, state,wedding, event, party as decor light, ambience light, or night light indoor and outdoor decoration.
21-key remote control, infrared remote control distance is 20-30 meters.
13 LED, More Bright More Durable: pond lights has 13 led beads, it’s 3 times more bright and lifelike than other submersible lights which just has 10 leds. led light is powered by 3 x AAA batteries, 3 times more than 10 leds lights(6 hours).（Does not include 3 AA batteries）
16 Colors, Multi Options, Dimmable Pool Light Underwater: Optimized 16 moving colors, multiple modes(flash, fade, smooth), Dimmable function, give you more choices, and create more beautiful, it’s much different from other inground pool lights in marketing(6 colors, less flash mode options). with memory function, it remembers you last setting, no need to set again.
Specification:
Material: abs
Size: About 8cm/3.1in
Input voltage: 4.5 (V)
Packaging process: SMD
Number of LED lamp beads: 13 (pcs)
Luminous flux: 3 (lm)
Color temperature: 3500 (K)
Luminous efficiency of lamps: 85 (lm/w)
Power factor: change according to the number of lamps
Lighting angle: 720 (degrees)
Temperature rise: 3000 (K)
Color rendering index: 90
Protection class: IP68
Control method: IC control
Life: 50000 (H)
Power: 1.3 (W)
Package List:
1 x set of 13LED diving lights (1 light + 1 remote control) （Does not include 3 AA batteries）
Notes:
Due to different displays and lighting effects, the actual color of the product may be slightly different from the color shown on the picture. Thanks!
Due to manual measurement, please allow slight measurement deviation.
Tips for LED Light：
1.Please make sure the sealing is undamaged, and properly stay in the.
2.Please twirl the light until it can not be twisted any further, to fully before putting underwater.( Very Important!!! otherwise it will leak)
3.Please dry the lights first before replacing batteries. Because the water outside lights may drop into lights and keep inside the battery case, it will damage the components, and overpower the lights.
4.For long use, we recommend to use rechargeable battery to save batteries and money.
5.Because some rechargeable batteries are a bit big to insert into the battery case, so the is not connecting properly, the light will not light up. If the lights don't light up once you insert all 3 batteries, please move the battery to make them connect properly.
6.It’s better not use in hot water, because the vapour may go into the light, it will damage the components and lead to stop working.
7.If you don’t use for following long, pleae remove batteries, it will help save power and protect led bulb.
Tips for RF Remote Control：
1.Please remove the plastic insulating film on the bottom of remote before using it.
2.Please long press the button "ON" on the remote for about 2 second to activate all the lights. turning on, no need to long press, the light will be very sensitive to rejoin what you set.
3.For underwater using, please keep the remote within 10FT/3M-16.4FT/5M, because water will largely absorb signal, and weaken the signal to the lights.
4.Low Battery Checking: Press the button "B", if it's no or very weak light, it means low battery, lease replace new batteries.Low power will weaken the sensitivity of remote.
5.Out of Power Checking: When the light stays in flashing red light, cannot control by other setting, it means it will be out of power soon, please replace new batteries.
6.Check the Remote Battery: When press the remote, you can see the red light on, if cannot see, it mean the remote is out of power, or it doesn't work, please remove the plastic film or replace new batteries.
Tips for Suction Cups：
1.Suction cup can be used in both and underwater on flat and surfaces. But not work on rough surface.
2.Please clean the surface before attaching, make sure there is not any stuff between the surface and suction cup, especially remember to remove the lubricant like shower cream, moss etc. ( very Important!!!)
3.Please pull the suction cups vertically if you want to remove them, don't pull it horizontally, it may pull out from the hole, there is the feature of design, it's not suction cup problem. Please note, and use it in correct way.
4.We already enlarged the suction cup to bigger size and tighter adsorptivity, it's competent to hold lights under 10-16.4ft/3-5m underwater.
Tips for Magnet：
1.magnet can work for any iron place which can be attracted by magnet, especially rough vertical surface, but not for vertical surface, please use suction cup instead.
2.The magnet is strong, but it's better to apply on pure iron surface, alloy may reduce the absorb effect.
3.This is all magnet feature, not our magnet's problem, not matter how big is the magnet, they have the same advantage and disadvantage, if you cannot attach by magnet, please try other way.