Shower Door Rollers, 25mm Diameter, Sliding Replacement, Fits 4-6mm Glass
Material: copper swing + electroplating plastic alloy.Wheel diameter: 25MM.Wheel thickness: 5 mm.Glass mounting hole: 12-14mm.Glass thickness: 4-6 mm.Easy installation, often used for bathroom sliding glass door pulley/rail.Fits most shower doors.Note: Please measure the dimensions for better installation before purchasing.Shower Door Casters 25mm Wheel Diameter These shower screen wheels are an ideal choice for sliding glass doors, patio doors and bathroom doors.Suitable for most shower rooms and steam rooms.Shower Door Casters Shower Door Casters Shower Door Casters Upper Pulleys The height of the upper pulley can be adjusted by turning the screw with a screwdriver.These shower door wheels are suitable for glass thickness 4-6mm and glass opening 12-14mm, there are 4 additional anti-collision blocks to give your shower door the best protection.Lower Pulleys The lower pulley is a stainless steel sealed bearing.It can be adjusted according to the height of the last round.Packing list Contains 2 upper rollers and 2 lower rollers.Each roller is equipped with an anti-collision block and a stainless steel screw.Shower Door Rollers How to Replace Pulleys?Step 1: Remove the decorative cover, loosen the screw and remove the old lower pulleys.Step 2: With the bottom pulleys removed, lift the sliding bathroom door and remove it.Step 3: Loosen the screws with a screwdriver and replace the upper pulley with a new one.Step 4: Lift the glass door and place the upper pulleys into the track.Step 5: Use a screwdriver to adjust the height of the upper pulleys to the highest point.Step 6: Install the lower pulleys and place them into the track.Step 7: Mount the anti-collision blocks on the rail to prevent the glass from colliding.Lonvrée
