Feature: Color: Light Green, Material: plastic, Size: 10x152cm / 0.3 ft x 59.84 inch(L*W), Thickness: 5.5mil. Performance: Flexible and stretchable for concave areas. Low cost to change the look of your vehicles. It provides a protective barrier for the car body from scratch and dirt. Easy to stick and remove, without residual glue on the car after removal. Resistant to, water, dirt, grease, salt, mild acid, high temperature, and oil. Made of: Made of plastic material, uniform color, smooth surface, no fading, anti-fading, anti-scratch. Installation Guide: 1. First clean the car paint surface repeatedly to ensure it is clean. Then use a silicone scraper to scrape the paint surface from the dry side to the wet side and from top to bottom, and then wipe the edges dry with a cloth. 2. Cut the car film according to the actual size of the paint surface. 3. After the car film is cut, cover it on the outside of the paint surface. Use an air heater to heat the places where you need to cover. At the same time, use a scraper to stick the car film tightly to the paint surface, and finally dry it with a towel. 4. Check whether it is firmly adhered and whether there are bubbles between the film and the paint surface, etc. If bubbles appear, they can be slowly removed with a scraper. What You Get: 1 Pc Vinyl Wrap Film.
WARNING: 