Speedway Motors Tire Groover Kit Cutter Grooving Iron, Includes Number 4 and Number 8 Head/Blades, 250 Watt Pistol Grip Grooving Iron Doubles as a Heated Siper

250-watt heating element creates strong, consistent heat. 110-volt operation for use with fixed power or trackside generating equipment. 7-foot-long fixed power cord for work accessibility. Perfect for grooving and siping tires used in dirt motorsports. Pistol grip design aids in cutting stability with or without heat. Includes #4 and #8 tool head and blades, other sizes available. Accepts all Speedway Motors and Ideal brand tool heads and blades. Multi-blade siper head can be used to cut six sipes at once. Depth of sipe adjustable by loosening blade screw and setting to desired depth. Grooving blades can be turned upside down to sipe the tire. Maximize Your Tire’s Traction by Adding Grooves and Sipes If you race on dirt you know that track conditions change throughout race day and many will ask how to increase traction on tires. From a high grip surface that can be wet and slinging mud to a shiny black or even hard and dusty surface as the laps pile up and the sun goes down, tire traction can change dramatically. While there are different tire compounds you can choose from to aid in traction depending upon the track’s bite, one thing many experienced racers do is modify their dirt tires by adding grooves and sipes to the tread blocks using a heated tire grooving iron tool with a specific cutting head and blade attachment. What is tire siping and grooving? Well, grooving is just that, cutting grooves in the tread where you are removing rubber, while siping is where you make a thin cut (like a razor blade) but no material is actually removed. These cuts can be made in various widths and directions to enhance traction and get the tire up to temperature faster but can also be used to increase a tire’s longevity by helping it run cooler too. It is all in how the tire is cut. Learning how to cut a tire with a tire groover and sipe your own tires is a bit of a black art, but a good racer will keep a logbook of modifications and can reflect on past track conditions to see what size groove and angle worked best previously. The same goes for tire siping. Often you can lean on a fellow racer for grooving and DIY tire siping advice or reach out to the tire manufacturer for suggestions on how its tire products react to certain grooving and siping cuts. Regrooving tires that have been sanded down and brought back to life is one way to save some money in your race budget too versus buying new rubber for your race car. Built Tough to Handle Any Tire Grooving tires and siping tires on your dirt racer takes some effort, but the Ideal heated Knives 125 tire groover tool is built to take it. Ideal starts off with a robust heating element that outputs a consistent heat and housed it in a tough steel shell with chrome-plated steel tip. The fiberglass-reinforced polymer handle keeps your hands safe from the extreme heat found at the head of the cutting tool. Ideal then added a fully grounded UL-listed power cord that is a generous 7-feet in length. This tire cutting tool is designed to work with all Ideal Heated Knives and Speedway Motors brand tire grooving iron heads and blades that we carry. This kit includes #4 and #8 heads and matching #4 and #8 blades. Additional head and blade sizes are available. Additionally, using our optional multi-blade siper head instantly turns the Ideal tire groover into a tire siping tool that makes quick work of your tread blocks. Grooving and Siping Your Tires Could not be Easier We carry a full lineup of cutting blades and heads (the heads and blades must match in size and used together) for the Ideal tire grooving iron. You will install the appropriate size head into the tool first, followed by the matching cutting blade. Set the depth of your blade before plugging the iron in and it gets hot. Generally, you will want your sipes to be 1/8-inch to 3/16-inch in depth and no more than 1/2 the depth of the tread block