IEC Magnetic Contactor, 1NC, 24V DC, 3 P, Non-Reversing, Screw

The Eaton XT IEC contactor is an IEC magnetic contactor designed to control power circuits. It is a 3-pole, non-reversing device with a 24 V DC coil, and it includes a 1NC auxiliary contact. The unit uses screw terminals, sits in Frame B of the XT series, and is rated for up to 690 V AC with an IP20 enclosure rating. It is intended for panel or DIN rail mounting and does not include an enclosure. Dimensions are 3 in wide, 2 in high, and 3 in deep. Key features - Poles: 3 - Coil voltage: 24 V DC - Action: Non-Reversing - Auxiliary contacts: 1 NC - Contact configuration: 1 NC - Terminals: Screw - Frame/Series: Frame B, XT - Maximum voltage: 690 V AC - IP rating: IP20 - Enclosure: No Enclosure - Mounting: DIN Rail, Panel - Mechanical durability: The mechanical durability indicates the number of operational cycles but does not guarantee performance over this lifespan. - Electrical operating durability: These figures specify typical electrical endurance ratings under test conditions; actual performance may vary based on application and usage conditions. - Full load current: Inductive 9 A; Resistive 22 A - Frequency: 50/60 Hz - Certifications/standards: UL Listed; CSA Certified; EN 60947; IEC 60947; RoHS; CE Marked - Temperature range: -13°F to 122°F - Dimensions: 3 in W x 2 in H x 3 in D - Reversing: No - Product name: Eaton XT IEC contactor