Embroidered PatchesEmbroidered patches can be ironed on to anything you can iron: Shirts, jeans, hats, blouses, pants, skirts, etc. Make your backpack or tote unique!Think you are not creative? With an iron on you can create a new look instantly. Its soooo easy!Heat seal to polyester/ Cotton fabrics. Do not apply to rain-wear Waterproof, highly elastic, Rayon, nylon or tri-acetate fabrics. Once applied, applique is permanently attached to garment and is washable, dryable and cleanable. For machine washing, turn garment inside-out before washing and drying.SETTINGINSTRICTIONSUSING AN IRON:Step1:Set your hand iron at the hottest temperature setting. DO NOT USE STEAM DURING APPLICATION.Step2:Place your embroidered patch in the desired position and place a pressing cloth such as a handkerchief, sheet or pillowcase fabric over top.Step 3:Press the iron straight down for 35-45 seconds with as much constant pressure as possible. NO BACK AND FORTH.Step 4:Turn The garment inside-out and repeat step 2 & 3.Step 5:Allow the applique or embroidered patch to cool down.SETTINGINSTRICTIONSUSING A HEAT SEAL MACHINE:Step1:Set your heat seal machine to 350 degrees.Step2:Place your embroidered patch in the desired position and place a pressing cloth such as a handkerchief, sheet or pillowcase fabric over top.Step 3:Press iron down for 20 seconds.Step 4:Increase temperature to 375 degrees. Turn the garment inside-out and press for 15 more seconds.Step 5:Allow the embroidered patch to cool down.
