Children's Electric Car Controller RX42 12V Children's Electric Car 2.4G Remote Control and Receiver Controller

Features:
* Strict quality control standards to build and test.
* Stable performance, high reliability.
* How to determine if the control box is suitable for your car?
* Open the damaged electric passenger car and check the control box.
* If the appearance of the control box is the same, this part should be suitable for your car.
* . The first use (or replacement of the battery) requires matching frequency;
Step 1. Install two AAA 1.5V batteries, (pay attention to the positive and negative polarity in the battery chamber), and finally close the battery cover, the indicator light will flash three times to indicate that the battery is installed correctly.
Step 2. Press and hold the frequency key (car selection) for about 2 seconds, the indicator light will flash
Step 3. Turn car power, indicator light will out
Step 4. If the matching frequency is unsuccessful (the indicator light does not go out), turn off the power and repeat steps 2 and 3.

Specifications:
Part Name: Children's Electric Car Controller
Model: RX42
Voltage: 12V
Material: ABS+Metal
Size: Standard
Color: As shown in the picture

Package Contents:
1 x Receiver
1 x Remote Control

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.