Ph10220 Heavy Duty Oil Filter Spin-on, Fram, PH10220

Engineered for conventional motor oil. Cellulose and glass blended media provides protection for oil change intervals up to 5,000 miles1. 95% filtration efficiency2. High strength tapping plates for positive filter seating & filter performance high strength spiral center tubes that do not allow for media collapse from internal pressure build up.Full flow lube spin on oil filterHeavy dutyDesigned with components that meet demands for regular oil change intervals according to oem recommendationsCellulose media for efficiency & capacity for particle removalCJ4 oil compatibleGasket materials that stand up to diesel engine environmentsStatistical process control insures quality manufacturing.Technology:With an ideal balance of dirt-trapping efficiency and dirt-holding capacity, fram extra guard oil filters use a special blend of fibers and resin to create a proprietary filter media that delivers excellent engine protectionExtra guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehiclesInstallation Instructions:Use proper protective gear. Used motor oil should not come in contact with bare skin. Engine oil may be hotPlace a drain pan under the oil filter and unscrew oil filterClean mounting base making sure the o ring from the old filter is not stuck to the filter mountApply film of clean oil to filter gasket. Do not use greaseScrew new filter on until gasket reaches base contact. Then tighten according to instructions on filter using tightening guide markersCheck owners manual for correct oil specification, viscosity and amountAdd oil to full on dipstick. Idle engine for five minutes and check for leaksShut off engine and recheck oil level after 5 minutes and top off as necessary.