400/600mm Outdoor Heater Thermocouple Replacement Parts With M6*0.75 Thread For Gas Patio Heater Fireplace Stoves Parts

Features:

*Common thermocouple Head with M6*0.75 thread, end connection: M8 x 1

*Maximum wire length of 400mm/600mm(optional).

*Designed specifically for outdoor gas patio heaters.

*Ensures safety and durability for prolonged use.

*Easy to install and compatible with a wide range of models.

Specifications:

*Product Name:Common Thermocouple Patio Heater Head

*Material:Metal

*Size:400/600mm

*Color:As shown

*Head thread: M6 x 0.75

*End connection: M8 x 1

*Terminal size: 6.3mm flat

Package Content:

1 x Thermocouple

Installation steps:

1. Install the thermocouple tip on the plate and fix its position with two nuts

2. Keep the tip about 5mm from the burner hole.

3. Tighten the thermocouple nut M8 on the valve end(please check if your valve end thread is 8mm before purchase)

4. Connect the two flat terminals well with the current tilt switch terminals.

5. Turn on the gas and push the valve for 5-10 seconds until the thermocouple end heats up.

6. Release your hand, it works fine. If it fails, please check: a. Is your thermocouple heated on the flame; b. Is the thermocouple end well connected to the valve c. Is the terminal well connected to the tilt switch.

Note:

1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.