50W For Ford E150 E250 2011-2014 H13 9008 LED Headlight Bulbs High Low Super Bright White

LED Headlights Bulbs:
Bulb Type: 9008/H13
Condition: 100% Brand New
Light Source：2 Sides LEDs
Material: Aviation Aluminum + ABS
Color Temperature: 6000K
Working Voltage: DC 9-32V(fit 12V,24V vehicles)
Output Power (Each): 130W
Number of Bulbs: 2PCS
Waterproof Rate: IP67
Luminous Flux: 30,000LM
Working Temperature: -40℃ - +80℃
Beam Type: High Beam/Low Beam
Beam Angle: 360 Degrees
Lifespan: Over 50,000 hours
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
Fitment Type: Direct Replacement
Placement on Vehicle: Front, Left, Right
Color: As the picture shows

Package Included:
2x 9008/H13 LED Headlight High-Low Dual Beam Bulbs

About this item:
【500% BRIGHTER】Each 9008/H13 led headlight bulb has top automotive grade LED chips ( 120W, 22000LM, 6000K white ) which make it 3 times brighter than traditional halogen bulbs.
【EXCELLENT BEAM PATTERN】The 9008/H13 led headlight bulb high and low use same beam pattern as original halogen bulbs but can deliver wider and further range light on road, without any dark spots nor glare to the oncoming traffic to ensure you a safer driving.
【50,000 HOURS LIFESPAN】The 9008/H13 headlight bulb is equipped with a full aviation aluminum body plus a 12,000 RPM powerful turbo-cool fan to ensure you the longest life duration while making bright and continuous 9008/H13 led light.
【5 MIN SIMPLE INSTALLATION】The 9008/H13 led headlight bulb can be installed within just 10 mins by simply plugging and playing. It is also IP67 waterproof, dustproof and cold resistant (-40℉~+105℉) that you are worry free to use under all types of weather conditions.

Package Included:
2 x 9008/H13 LED Headlight Bulbs

Install Caution:
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Make sure to have the ignition turned off and the keys removed.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system)