White Rouge Jewelers Polishing Compound Buffing Jewelry Polish High Luster 5oz

WHITE ROUGE POLISHING COMPOUND
SILVER POLISHING - FOR WHITE METALSWHITE METAL POLISHING COMPOUND 

White rouge compound is formulated especially to polish white metals especially SILVER. The White Compound is widely used by Metalsmiths for a High Polish Finish. Compound is used on a buffer - motor by applying a small amount of this compound on a Muslin - Finex - White Buff.  Apply the compound to the buff surface, with the make sure buff edge is clean for best results.  Compound can be used for Bright Polish on White Metals - Gold - Silver...

SPECIFICATIONS: 
- Rectangular Bar Sizes: 5" x 1" x 1-1/8"
- Bar Weight:  5oz. (+/-) 
  ·  Utilizes Graded Abrasives
  ·  Blended with Additives
  ·  Long Lasting Composition with Minimum Usage
  ·  Good Adhesion to Buffing Wheels 
  ·  Produces -  High Shine

SALE IS FOR 1 BAR

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible:  

·        Use the right compound for the metal that you are trying to polish
·        It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
·        Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
·       Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
·        Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.
·        A clean buffing wheel edge is important.
·        Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.      
·        Whenever you are working with Platinum never use a buff that was used for another type of metal.