DIY High Frequency Coil Plasma Arc Experimental Set for Electronic Flame Demonstration 36‑48V DC US Plug AC100‑240V

Feature: 1. INCLUDE ITEMS: This DIY plasma flame kit includes the host, coils, connecting wire and power adapter, with simple structure and easy operation. 2. GOOD COOLING: With special cooling device, equipped with cooling fan and reasonable circuit design, good cooling effect, efficient and practical. 3. EASY CONNECTION: Just place the host, then connect the host and ignition coil correctly, and plug in the power adapter, and control it through the switch. 4. EPOXY TUBE: The ignition coil adopts excellent epoxy tube, which has good dielectric properties and machinability, convenient and durable. 5. FOR EXPERIMENTS: This DIY coil kit is widely used in DIY electronic candles, high frequency plasma flame demonstrations, etc., is a good teaching aid. Specification: Item Type: DIY Coil Material: ABS Working Current: 1.8-2.5A Frequency: About 15Mhz Run Time: 20 minutes Ignition Coil: Epoxy Tube How to Use: 1. Place the main unit and connect the main unit and ignition coil correctly 2. Plug in the power adapter, and the fan on the host starts to work 3. Turn on the switch, the indicator light next to the switch is on, and the indicator light in the top coil is on 4. Use objects (screwdrivers, sticks, blades, iron wires, etc.) to touch the discharge needle as soon as possible to ignite the flame Package List: 1 x Host 2 x Coils 1 x Cable 1 x Power Adapter Note: 1. Please use it in strict accordance with the regulations. Improper use may cause fire, electric shock, burns and other accidents. 2. Parts that are strictly prohibited to be touched during work: secondary coil, top coil of the host, and output discharge needle of the host 3. Do not use overvoltage, and the working power supply voltage should not be higher than DC52V 4. Do not change the parameters at will 5. The positive and negative poles of the power supply are strictly prohibited from being reversed. 6. The working time is recommended to be within 20 minutes. Exceeding the time will cause the ignition coil to be aged and damaged at high temperature. 7. To ensure safety, please ensure that there are no inflammable and explosive materials around the product before work 8. When working, it will cause certain electromagnetic interference to surrounding electronic equipment 9. This product is not waterproof, please do not use it in a place that is too humid 10. Do not use items to connect the high temperature tape part of the primary coil during work to avoid secondary damage