Turbo Turbocharger w/ Gaskets Set For 2018-2020 Honda Accord 1.5L 18081-0528E

Description:
Type:Turbocharger
Color:Silver
Finish:Polished
Replace Part Number:
18081-0528E,180810528E, 180810528E, 18900-6A0-003,18120-1132E, 18120 1132E,181201132E

Features:
1.Ductile Iron QT450-10 turbine housing - Temperature resistant up to 700℃.
2.K418 Alloy turbine wheel- High oxidation stability AND resistance up to 900℃.
3.Cast aluminium blades with good gas tightness and corrosion resistance.
4.ZL104 aluminum compressor housing with lightweight.

Fitment:
Fit 2018 - 2020 Honda Accord

Package Includes:
1 x Turbocharger

INSTALLATION AND USE
1、Before install the turbocharger on the engine, you must lubricate it. Input the clean oilat the entrance of the oil drain and turn the“shaft and wheel”by hand.
2、Good engine oil is important for the turbocharger. It must be 40CD at least.
3、Install the turbocharger on the engine,make sure that it is fastened and sealec at the connection,Otherwise it causes to howl and leaking oil.
4、After you start the engine, keep idling for 3-5 minutes. It will make the turbocharger lubricated completely. And you should also keep idiing 3 ~ 5 minutes before you shut the engine. It can avoid the oil coked and the bearing burned. If you often operate it incorrectly, its life will be reduced.
5、Don't keep idling over 10-15 minutes. Otherwise it would cause leaking oil at the end of“compressor wheel”.
6、Forbid to operate the engine“accelerate, flameout, slide”. It would make the turbocharger run short of oil.