NOTE:
This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID. Pls confirm the item if it can matches your car before you purchase.
LED Headlight:
Plug Type: H4 9003 (High Beam and Low Beam) + H8/H9/H11 (fog light)
Power: 50W/Bulb
LED Quantity(each bulb): 2 pcs* LED Chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: White 6000K
IP68 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 100,000hrs lifetime
Usage: headlight,fog light
Headlight Bulbs Features:
1.Extremely bright LED chip,360 degree clear beam no blind zone.
2.Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light.
3.Xenon white light reflect road paint/signs better to show clearer road situation.
4.Built-in constant current CPU,instant full brightness without start-up relay.
5.Easy plug and play design, no resistor or modification needed.
6.The bulb body size of our bulb is smaller than other four-sided LED bulbs on the market, no need to worry about interference with the dust cover.
Two-way heat dissipation channel:
1. All-in-one aluminum profile as heat conduction system, 360 degree heat radiating.
2. High speed mute fan(12000R/min), high air flow for faster cooling rate.
Foglight :
Plug Type: H8/H9/H11
LED Quantity(each bulb): 2pcs* 3570 CSP chips
Luminous Flux: 11000LM/set (5500LM/bulb)
Operating Voltage: DC 12V(fit 12V vehicles)
Color Temperature: 6000K White
IP68 rated water and dust seal, over 50000hrs lifetime
Beam Angle: 360 degree
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: Fog light
Package Included:
2 x H4(9003) LED Headlights Bulbs
2 x H11(H9/H8) Fog Light
Install Caution:
● As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
● Put the vehicle into park or make sure it is securely in gear.
● Make sure to have the ignition turned off and the keys removed.
● Be careful to avoid burns, especially when turning on or off the vehicles lighting.
● Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
● Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
● Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
