FX3U-M26MT-E PLC Ethernet Port EM3 Module for AMSAMOTION Programmable Controller Logic FX3U-26MT-E

GENERAL INFO:
FX3U-M26MR     Relay            Digital    16I/10O    Analog     2I/2O      NO Ethernet Port
FX3U-M26MT      Transistor      Digital    16I/10O    Analog     2I/2O     NO Ethernet Port
 
FX3U-M26MR-E  Relay            Digital    16I/10O,    Analog     4I/2O       Ethernet Port
FX3U-M26MT-E   Transistor      Digital    16I/10O,    Analog     4I/2O      Ethernet Port
 
Software:GX Works2/GX Developer
 
Download Here
 
Features
✔ MCU adopts ARM32-bit industrial processor, which is suitable for small PLC for industrial automation applications
✔ Compatible with most commands of Mitsubishi FX3U, supports GXworks2/GxDeveloper programming; comes with independent programming port
✔ All IO ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences. The input supports positive/negative triggering, which is convenient to use
✔ One 10/100Mbps network port, support MC and MODBUS TCP protocol communication
✔ High-speed counter function
✔ Support 2 channels of 100K high-speed pulse output
✔ Built-in analog input and output channels
✔ The power circuit adopts anti-reverse connection and anti-surge design
✔ All key electronic components are imported from major brands, and the warranty is 1 year
✔ Widely applicable to signal acquisition and control of industrial field equipment
Basic functions
1. Basic command speed: 0.18us/step, fast command execution speed
2. Large program capacity: the program memory size is 0~16000 steps, with complete basic/application instructions
3. It has powerful functions such as clock perpetual calendar, RUN/STOP switch, A/D, D/A, firmware upgrade, etc.
4. DIN rail installation, easy maintenance

 
Communication Function
1. The programming port is the standard RS422 S terminal. In addition, the programming port can also communicate with the touch screen that supports the FX3U PLC protocol.
2. Comes with RS485 communication port, supports MODBUS RTU communication protocol, supports FX3U PLC protocol touch screen communication
3. Comes with 1 RJ45 network port, supports MODBUS TCP communication protocol, and supports Mitsubishi GX Works2 or above programming
The software uses the network port to communicate with the PLC
High-speed counter function
1. Support 6 channels (X0~X5) single-phase high-speed pulse counting, 2 channels AB phase counting, of which 4 channels (X0~X3) 100K single-phase
Counting, 2 channels (X4~X5) 40K pulse counting
Pulse output function
1. ETH-AMX-FX3U-26MT supports 2 channels (Y0~Y1) 100K high-speed pulse output
Main specifications
Model: FX3U-26MR/T-E
Digital input
➤input points: 16
➤Input signal type: switch contact signal or level signal, support
➤positive and negative trigger
➤Input signal voltage: DC 18~28V
➤Insulation circuit: optocoupler isolation
Digital output
➤Output points: 10
➤Output type: Relay
➤Contact capacity: 30VDC/5A, 250VAC/5A
➤Insulation circuit: mechanical insulation
Analog input
➤Input points: 2
➤Input type: voltage/current, DIP switch switch input type
➤Input range: 0~10V/0~20ma
➤Conversion accuracy: 12 bits
Analog output
➤Output points: 2
➤Output type: voltage, current
➤Output range: 0~10V/0~20ma
➤Conversion accuracy: 12 bits
High-speed counter
✈Input points: 6 channels (X0~X5) single phase, 2 channels AB phase
✈Pulse frequency: single-phase 4 channels 100K (X0~X3), 2 channels 40K (X4~X5)
✈Input signal voltage: DC 18~28V
High-speed pulse output
✈AMX-FX3U-26MR-E
✈Number of output points: No high-speed pulse output
✈Pulse frequency: no high-speed pulse output
✈AMX-FX3U-26MT-E
✈Number of output points: 2 channels (Y0~Y1)
✈Pulse frequency: 100K per channel
Communication Interface
✈RS485: 1 channel, support MODBUS RTU, FX3U PLC communication protocol
✈RS422: 1 channel, supports uploading, downloading, and monitoring
✈RJ45 1 channel, 10/100Mbps communication rate, support MODBUS TCP, Mitsubishi FX3U built-in TCP/IP protocol
Power Supply
✈Power supply: DC24V, terminal access; with anti-reverse protection
✈Power consumption: 2W~4W
✈Surge protection: 600W
Structure and environment
✈Size (mm): 129*86*50
✈Installation method: 35mm DIN rail
✈Working temperature: 0℃~+50℃ (no freezing)
✈Working humidity: 10~80%RH (non-condensing)



 
Description
1. The Em3 Series Module Is Suitable For FX3U Series PLC And It's A Module That Extends The Number Of Digital And Analog Points
2. Connected Through Expansion Cables Without Programming
3. After Being Connected And Powered On, It Is Directly Mapped To The Corresponding Plc Address, Which Is Convenient And Easy To Use.
 
INFORMATION
 
EM3-AN8-8NTC10K     NTC10K      Tmeperature 8I
 
 
EM3A-IO8R     Switching quantity 8 in and 8 out
EM3A-AM8     Analog quantity 4 in 4 out
EM3A-AE8     Analog quantity 8 in
EM3A-AQ8     Analog quantity 8 out
EM3A-AR8G   PT100 Temperature module 8I