JVCC DC-WPVC98 Double-Sided PVC Tape is a white PVC film coated on both sides (AKA double-coated) with a modified acrylic adhesive, solvent-free, based on aqueous dispersions. Its adhesive strength builds up with time (1-hour swell time) and it is very moisture and temperature resistance. The adhesive on this double-sided tape has good tack and adheres extremely well to PE- and PP- films as well as to rough surfaces such as chipboards. JVCC DC-WPVC98 is also APEO/APE free.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 96mm x 33m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.
Technical Information - Core: 3 inch diameter
- Backing/Carrier: polyvinyl chloride (PVC) film
- Adhesive: modified acrylic
- Release Liner: 90g/m2 gold siliconized paper
- Standards Met: APEO/APE free
- Thickness: 9.84 mils (carrier, adhesive) 6.64 mils (adhesive) 3.2 mils (carrier)
- Adhesion: 164 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -40F to 266F
