Country Brook Design - 1 Inch Printable Heat Set Lanyard Polyester Webbing

Woven from 100% polyester fibers, this webbing second has a stunningly smooth finish which is excellent for crisp, photo-quality sublimation! This webbing has a high tensile strength and can be used for virtually any project. In addition, this webbing has already been heat-set, which reduces shrinkage and ghosting while sublimating.

This material is listed as low-grade or second because the edge of the material can feel thin or sharp. This material is sold as-is.

For this webbing, it is best to use 1-inch hardware, such as D-rings, buckles, or triglides. Please be aware that some rolls may contain factory splices, but we would be more than happy to get you a continuous roll; just let us know when ordering!

Tensile strength is the average breaking point under good conditions at the factory. We recommend that you use no more than 25% of the tensile strength of any webbing.

Country Brook Design cannot be held responsible for the misuse of our product. It is the responsibility of the purchaser to determine the suitability of the product for their use.

DISCLAIMER: This printable polyester webbing is the same one we use for our sublimated products. Although we always have success sublimating on this webbing, we can not guarantee sublimation results based on the many different available processes. Your printer, ink, paper, temperature, pressure, and sublimation time can all affect the outcome.