The ASCO 8262H007 Solenoid Valve is a 2-way, 2-position direct-acting valve with a normally closed configuration. It features a stainless steel body and is designed to control the flow of air, inert gas, light oil, and water with a nominal pipe size of 1/4 inch. The valve includes an coil and sealing components made from NBR material. Its coil is rated class F for insulation and operates at 120V AC with a 60 Hz frequency. The valve supports horizontal or vertical mounting orientations and has IP66 ingress protection; suitable for indoor and outdoor use per IP66 rating. Key Features: - Valve Design: 2-Way/2-Position, Direct Acting, Normally Closed - Body Material: Stainless Steel - Nominal Pipe Size: 1/4 in; Orifice Diameter: 1/8 in; Center Line Pipe Center Size: 2-1/4 in - Operating Pressure Differential: Maximum 130 psi (Air/Inert Gas), 110 psi (Water), 90 psi (Light Oil); Minimum 0 psi - Fluid Compatibility: Air, Inert Gas, Light Oil, Water - Electrical: 120V AC, 60 Hz, 10.6 W wattage, coil enclosure watertight without junction box, electrical connection via 1/2 in conduit with 18 in leads - Coil Insulation Class: F; Includes Coil and Seal - Environmental Rating: IP66; Indoor/Outdoor use per IP66 - Dimensions: Overall Length 1-9/16 in, Width 1-11/16 in, Height 2-31/32 in - Valve Type: 2-way/2-position, direct-acting, normally closed; Port size 1/4 in; Orifice diameter 1/8 in - Thread Type: NPT inlet and outlet with NPTF connection type
